Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
HK HM BMM
BMM CN gerotor motor
Product image
Properties
| Connection |
Oil fittings at rear: A + B = G 3/8"; leak oil = G 1/8" |
| Design |
Economy variant NBR seals Shaft Ø 16mm |
| Intake and return pressure with leak oil line max. |
140 bar |
Item
Sort upwards
Sort downwards
 Identification |
Flow rate max. (L/min) |
Displacement (cc) |
Speed min. (rpm) |
Speed max. (rpm) |
Torque max. (N-m) |
Pressure drop max. (bar) |
Pmax. at 0-100 rpm (bar) |
Pmax. at 100-300 rpm (bar) |
Pmax. at 300-600 rpm (bar) |
Pmax. at >600 rpm (bar) |
L (mm) |
Weight (kg) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| HK HM BMM 008 | 16 | 8,2 | 50 | 1950 | 11 | 100 | 140 | 90 | 30 | 15 | 105 | 1,9 |
| HK HM BMM 012 | 20 | 12,9 | 40 | 1550 | 16 | 100 | 140 | 90 | 30 | 15 | 107 | 2,0 |
| HK HM BMM 020 | 20 | 19,9 | 30 | 1000 | 25 | 100 | 140 | 90 | 30 | 15 | 110 | 2,1 |
| HK HM BMM 032 | 20 | 31,8 | 30 | 630 | 40 | 100 | 140 | 90 | 30 | - | 115 | 2,2 |
| HK HM BMM 040 | 20 | 39,8 | 25 | 500 | 45 | 90 | 140 | 90 | 30 | - | 118 | 2,3 |
| HK HM BMM 050 | 20 | 50,3 | 20 | 400 | 46 | 70 | 140 | 90 | - | - | 123 | 2,4 |
max. pressure on shaft seal (without leak oil line) or pressure in leak oil line – Values for torque and pressure drop apply for continuous operation
Accessories
- HK EPMM F
- Flange for gerotor motor
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.