HK EPMS
EPMS geroller motor
Product image
![HK EPMS HK EPMS](/data/img/product/HK_EPMS.jpg)
![HK EPMS - data/img/product/HK_EPMS_Zeichnung_1.gif data/img/product/HK_EPMS_Zeichnung_1.gif - HK EPMS](/data/img/product/HK_EPMS_Zeichnung_1.gif)
Properties
Connection |
Oil connectors: A + B = G 1/2"; leak oil = G 1/4" |
Design |
Standard variant Type "C" with standard seal Four hole flange bolt circle 106,4 Shaft Ø 32mm |
Intake and return pressure with leak oil line max. |
210 bar |
Note
It is generally recommended that the leak oil line is connected!
Item
![](/images/up.gif)
Sort upwards
Sort downwards
![]() |
Flow rate max. (L/min) |
Displacement (cc) |
Speed min. (rpm) |
Speed max. (rpm) |
Torque max. (N-m) |
Pressure drop max. (bar) |
Pmax. at 0-100 rpm (bar) |
Pmax. at 100-300 rpm (bar) |
Pmax. at >300 rpm (bar) |
L (mm) |
Weight (kg) |
---|---|---|---|---|---|---|---|---|---|---|---|
HK EPMS 080 C | 65 | 80,5 | 10 | 810 | 200 | 175 | 100 | 50 | 20 | 166 | 9,8 |
HK EPMS 100 C | 75 | 100,0 | 10 | 750 | 290 | 175 | 100 | 50 | 20 | 169 | 10,0 |
HK EPMS 125 C | 75 | 125,7 | 8 | 600 | 370 | 175 | 100 | 50 | 20 | 174 | 10,3 |
HK EPMS 160 C | 75 | 159,7 | 8 | 470 | 460 | 150 | 100 | 50 | 20 | 180 | 10,7 |
HK EPMS 200 C | 75 | 200,0 | 8 | 375 | 460 | 140 | 100 | 50 | 20 | 187 | 11,1 |
HK EPMS 250 C | 75 | 250,0 | 8 | 300 | 500 | 125 | 100 | 50 | - | 195 | 11,6 |
HK EPMS 315 C | 75 | 314,9 | 8 | 240 | 540 | 120 | 100 | 50 | - | 207 | 12,3 |
HK EPMS 400 C | 75 | 397,0 | 8 | 185 | 580 | 100 | 100 | 50 | - | 221 | 13,2 |
max. pressure on shaft seal (without leak oil line) or pressure in leak oil line – Values for torque and pressure drop apply for continuous operation – pmax = max. pressure
Accessories
![](/images/up.gif)
- HK V0 590
- Shock valve
Spare parts
![](/images/up.gif)
- HK EP DS
- Seal kit for hydraulic planetary motor
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.