Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
HK HM BMT
BMT CN geroller motor
Product image
Properties
| Connection |
Oil fittings: A + B = G 3/4"; leak oil = G 1/4" |
| Design |
Economy variant / short shaft always connect drain line Four hole flange bolt circle 160 Shaft Ø 40mm, length 60mm |
| Intake and return pressure with leak oil line max. |
210 bar |
Note
It is generally recommended that the leak oil line is connected!
Item
Sort upwards
Sort downwards
 Identification |
Flow rate max. (L/min) |
Displacement (cc) |
Speed min. (rpm) |
Speed max. (rpm) |
Torque max. (N-m) |
Pressure drop max. (bar) |
Pmax. at 0-100 rpm (bar) |
Pmax. at 100-300 rpm (bar) |
Pmax. at >300 rpm (bar) |
L (mm) |
Weight (kg) |
|---|---|---|---|---|---|---|---|---|---|---|---|
| HK HM BMT 160 | 100 | 158,8 | 10 | 625 | 450 | 200 | 75 | 40 | 20 | 210 | 20,3 |
| HK HM BMT 200 | 125 | 200,8 | 10 | 625 | 560 | 200 | 75 | 40 | 20 | 215 | 20,8 |
| HK HM BMT 250 | 125 | 252,2 | 10 | 500 | 710 | 200 | 75 | 40 | 20 | 220 | 21,4 |
| HK HM BMT 315 | 125 | 317,5 | 10 | 280 | 900 | 200 | 75 | 40 | 20 | 227 | 22,4 |
| HK HM BMT 400 | 125 | 401,6 | 10 | 305 | 1000 | 180 | 75 | 40 | 20 | 236 | 23,0 |
| HK HM BMT 500 | 125 | 535,5 | 10 | 240 | 1120 | 160 | 75 | 40 | - | 255 | 24,0 |
max. pressure on shaft seal (without leak oil line) or pressure in leak oil line – Values for torque and pressure drop apply for continuous operation – pmax = max. pressure
Accessories
- HK V0 590
- Shock valve
Spare parts
- HK HM BM DS
- Seal kit for hydraulic planetary motor CN
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.