Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
HK V1 710
V1710 non-return valve
Product image
Properties
| Design |
Cone locking pilot-controlled - single-acting |
| Material |
Housing: Galvanised steel Inside parts of hardened steel |
| Operating pressure |
max. 320 bar |
Note
Please note: max. thread depth S1 =10.1 mm!
Item
Sort upwards
Sort downwards
 Identification |
Opening pressure (bar) |
Level control ratio | Q max. (L/min) |
A (mm) |
B (mm) |
C | D | AF (mm) |
Weight (kg) |
|---|---|---|---|---|---|---|---|---|---|
| HK V1 710 0004 | 2,5 | 1:9 | 15 | 103 | 31 | 1/4" | 1/4" | 36 | 0,60 |
| HK V1 710 0006 | 5,0 | 1:6 | 35 | 112 | 35 | 1/4" | 3/8" | 40 | 0,82 |
| HK V1 710 0008 | 3,0 | 1:4 | 45 | 120 | 38 | 1/4" | 1/2" | 42 | 1,10 |
| HK V1 710 0012 | 0,5 | 1:4 | 80 | 151 | 45 | 1/4" | 3/4" | 55 | 1,90 |
AF = Width across flats
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.