Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
HK V6 215
flow control valve
Product image
Properties
| Design |
pressure-compensated |
| Material |
Housing: Cast iron Inside parts of steel |
| Operating pressure |
max. 250 bar |
Description
With these 3-way flow control valves, the preferred oil flow (P) is held constant irrespective of the incoming oil flow (IN). The residual oil flow (B) can be diverted to the tank or used for an ancillary consumer
Division: max. 75 % of quantity from IN to P, min. 5 l/min to P
Note
These valves must be set according to the application.
Item
Sort upwards
Sort downwards
 Identification |
Thread IN/B | Thread P | Inlet max. (L/min) |
Width (mm) |
Height (mm) |
Length (mm) |
Weight (kg) |
|---|---|---|---|---|---|---|---|
| HK V6 215 0320 | G 1/2” | G 3/8” | 40 | 65 | 98 | 87 | 1,26 |
| HK V6 215 0322 | G 3/4” | G 1/2” | 70 | 80 | 101 | 106 | 1,75 |
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.