HSRS EE
Elastomer insert for steel pipe clamp
Product image
![HSRS EE HSRS EE](/data/img/product/HSRS_EE_Foto.jpg)
![HSRS EE - data/img/product/HSRS_EE_MEx.gif data/img/product/HSRS_EE_MEx.gif - HSRS EE](/data/img/product/HSRS_EE_MEx.gif)
Properties
Design |
Elastomer insert |
suitable for |
HSRS steel pipe clamps |
Temp. min. |
-40 °C |
Temp. max. |
125 °C |
Material |
Santoprene 64° Shore A |
Special features |
Excellent oil and weather resistance secure mounting of pipes and hose lines Improved noise and vibration damping |
Item
![](/images/up.gif)
Sort upwards
Sort downwards
![]() |
d1 (mm) |
Ø D (mm) |
---|---|---|
HSRS 25-12 EE | 12,00 | 25 |
HSRS 25-15 EE | 15,00 | 25 |
HSRS 30-20 EE | 20,00 | 30 |
HSRS 35-25 EE | 25,00 | 35 |
HSRS 42-30 EE | 30,00 | 42 |
HSRS 50-35 EE | 35,00 | 50 |
HSRS 50-38 EE | 38,00 | 50 |
HSRS 50-42 EE | 42,00 | 50 |
Accessory for following products
![](/images/up.gif)
- HSRS
- Steel pipe clamp
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.