Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
HD 200 RM (2SN)
HD hose, harsh conditions
Product image
Properties
| Application |
medium high pressure range under extreme usage conditions Installations with high abrasion Shipbuilding Mining and opencast mining |
| Special features |
high ozone and abrasion resistance weatherproof |
| Standard |
EN 853 2 SN |
| Inner layer |
oil resistant synthetic rubber |
| Insert |
two high tensile steel wire braided inserts |
| Outer layer |
flame-retardant to MSHA synthetic rubber with high ozone, abrasion, and weather resistance |
| Colour |
black |
| Temp. min. |
-40 °C |
| Temp. max. |
100 °C |
| Media |
Mineral oil Glycol Polyglycol based oil Water (0°C to + 70°C) Water-oil emulsion (0°C to +100°C) |
Note
The change in length of the hose is determined at max. working pressure during testing to EN ISO 1402.
Item
Sort upwards
Sort downwards
 Identification |
DN* | Size | Inches | Internal Ø min. (mm) |
Internal Ø max. (mm) |
Ø Insert min. (mm) |
Ø Insert max. (mm) |
External Ø max. (mm) |
Operating pressure (bar) |
Test pressure (bar) |
Burst pressure (bar) |
Min. bending radius (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| HD 206 RM | 6 | 4 | 1/4" | 6,2 | 7,0 | 12,1 | 13,3 | 15,7 | 400,0 | 800 | 1600 | 100 |
| HD 208 RM | 8 | 5 | 5/16" | 7,7 | 8,5 | 13,7 | 14,9 | 17,3 | 350,0 | 700 | 1400 | 115 |
| HD 210 RM | 10 | 6 | 3/8" | 9,3 | 10,1 | 16,1 | 17,3 | 19,7 | 330,0 | 660 | 1320 | 125 |
| HD 213 RM | 12 | 8 | 1/2" | 12,3 | 13,5 | 19,0 | 20,6 | 23,0 | 275,0 | 550 | 1100 | 180 |
| HD 216 RM | 16 | 10 | 5/8" | 15,5 | 16,7 | 22,2 | 23,8 | 26,2 | 250,0 | 500 | 1000 | 200 |
| HD 220 RM | 19 | 12 | 3/4" | 18,6 | 19,8 | 26,2 | 27,8 | 30,1 | 215,0 | 430 | 850 | 240 |
| HD 225 RM | 25 | 16 | 1" | 25,0 | 26,4 | 34,1 | 35,7 | 38,9 | 165,0 | 325 | 650 | 300 |
| HD 232 RM | 31 | 20 | 1.1/4" | 31,4 | 33,0 | 43,3 | 45,7 | 49,5 | 125,0 | 250 | 500 | 420 |
| HD 240 RM | 38 | 24 | 1.1/2" | 37,7 | 39,3 | 49,6 | 52,0 | 55,9 | 90,0 | 180 | 360 | 500 |
| HD 250 RM | 51 | 32 | 2" | 50,4 | 52,0 | 62,3 | 64,7 | 68,6 | 80,0 | 160 | 320 | 630 |
DN = Nominal diameter, nominal width
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.