Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
SG 100 RI EP
Suction hose
Product image
Properties
| Application |
Hose for suction and return lines with restricted installation space |
| Inner layer |
EPDM |
| Insert |
two high tensile textile inserts and one spring steel spiral |
| Outer layer |
EPDM |
| Colour |
black |
| Temp. min. |
-40 °C |
| Temp. max. |
125 °C |
| Media |
Water |
Note
Unsuitable for use with swage fittings.
Item
Sort upwards
Sort downwards
 Identification |
DN* | Size | Inches | Internal Ø (mm) |
External Ø (mm) |
Operating pressure (bar) |
Burst pressure (bar) |
Vacuum (bar) |
Min. bending radius (mm) |
|---|---|---|---|---|---|---|---|---|---|
| SG 120 RI EP | 19 | 12 | 3/4" | 19,0 | 28 | 10,0 | 30 | -0,9 | 40 |
| SG 125 RI EP | 25 | 16 | 1" | 25,0 | 35 | 10,0 | 30 | -0,9 | 60 |
| SG 132 RI EP | 31 | 20 | 1.1/4" | 32,0 | 42 | 10,0 | 30 | -0,9 | 85 |
| SG 140 RI EP | 38 | 24 | 1.1/2" | 38,0 | 48 | 10,0 | 30 | -0,9 | 110 |
| SG 150 RI EP | 51 | 32 | 2" | 50,8 | 62 | 8,0 | 24 | -0,9 | 150 |
| SG 157 RI EP | 60 | 36 | 2.1/4" | 57,0 | 69 | 10,0 | 30 | -0,9 | 143 |
| SG 163 RI EP | 63 | 38 | 2.1/2" | 63,5 | 77 | 10,0 | 30 | -0,9 | 159 |
| SG 176 RI EP | 76 | 48 | 3" | 76,2 | 90 | 10,0 | 30 | -0,9 | 191 |
| SG 190 RI EP | 90 | 56 | 3.1/2" | 90,0 | 104 | 10,0 | 30 | -0,9 | 225 |
| SG 1102 RI EP | 100 | 102 | 4" | 101,6 | 116 | 8,0 | 24 | -0,9 | 310 |
| SG 1127 RI EP | 125 | 96 | 5" | 127,0 | 145 | 8,0 | 24 | -0,9 | 500 |
DN = Nominal diameter, nominal width
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.