Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
SG 100 RI
Suction hose
Product image
Properties
| Application |
Hose for suction and return lines |
| Special features |
chequered outer cover |
| Standard |
similar to SAE 100 R4 |
| Inner layer |
oil resistant synthetic rubber |
| Insert |
two high tensile textile inserts and one spring steel spiral |
| Outer layer |
synthetic rubber |
| Colour |
black |
| Temp. min. |
-40 °C |
| Temp. max. |
80 °C |
| Media |
Mineral oil Water-glycol emulsions Water-oil emulsions |
Note
The recommended flow velocity for media in suction hoses is a maximum 1m/s.
Item
Sort upwards
Sort downwards
 Identification |
DN* | Size | Inches | Internal Ø (mm) |
External Ø (mm) |
Burst pressure (bar) |
Vacuum (bar) |
Min. bending radius (mm) |
|---|---|---|---|---|---|---|---|---|
| SG 120 RI | 19 | 12 | 3/4" | 19,0 | 29 | 30 | -0,9 | 50 |
| SG 125 RI | 25 | 16 | 1" | 25,4 | 34 | 30 | -0,9 | 60 |
| SG 132 RI | 31 | 20 | 1.1/4" | 32,0 | 42 | 30 | -0,9 | 75 |
| SG 140 RI | 38 | 24 | 1.1/2" | 38,0 | 48 | 30 | -0,9 | 100 |
| SG 150 RI | 51 | 32 | 2" | 50,8 | 62 | 30 | -0,9 | 130 |
| SG 160 RI | 60 | 40 | 2.3/8" | 60,0 | 72 | 30 | -0,9 | 165 |
| SG 163 RI | 63 | 40 | 2.1/2" | 63,5 | 75 | 30 | -0,9 | 175 |
| SG 176 RI | 76 | 48 | 3" | 76,2 | 89 | 30 | -0,9 | 210 |
| SG 190 RI | 90 | 56 | 3.1/2" | 90,0 | 103 | 21 | -0,9 | 270 |
| SG 1102 RI | 100 | 64 | 4" | 101,6 | 116 | 21 | -0,9 | 300 |
| SG 1127 RI | 125 | 80 | 5" | 127,0 | 142 | 12 | -0,9 | 400 |
| SG 1152 RI | 150 | 96 | 6" | 152,4 | 169 | 12 | -0,9 | 600 |
| SG 1203 RI | 200 | 128 | 8" | 203,0 | 223 | 12 | -0,8 | 810 |
DN = Nominal diameter, nominal width – Burst pressure: Safety factor = 3:1
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.