Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
SGB 100
Suction hose
Product image
Properties
| Application |
Hose for suction and return lines with restricted installation space |
| Standard |
similar to SAE 100 R4 |
| Inner layer |
oil resistant synthetic rubber |
| Insert |
two high tensile textile inserts and one embedded spring steel spiral |
| Outer layer |
synthetic rubber with high ozone, abrasion, and weather resistance |
| Colour |
black |
| Temp. min. |
-40 °C |
| Temp. max. |
100 °C |
| Media |
Mineral oil Water-glycol emulsions Water-oil emulsions |
Note
The recommended flow velocity for media in suction hoses is a maximum 1m/s.
Item
Sort upwards
Sort downwards
 Identification |
DN* | Size | Inches | Internal Ø (mm) |
External Ø (mm) |
Burst pressure (bar) |
Vacuum (bar) |
Min. bending radius (mm) |
|---|---|---|---|---|---|---|---|---|
| SGB 120 | 19 | 12 | 3/4" | 19,0 | 29 | 63 | -0,8 | 40 |
| SGB 125 | 25 | 16 | 1" | 25,4 | 35 | 51 | -0,8 | 55 |
| SGB 132 | 31 | 20 | 1.1/4" | 32,0 | 42 | 42 | -0,8 | 70 |
| SGB 140 | 38 | 24 | 1.1/2" | 38,0 | 50 | 30 | -0,8 | 80 |
| SGB 145 | 45 | 28 | 1.3/4" | 45,0 | 56 | 30 | -0,8 | 100 |
| SGB 150 | 51 | 32 | 2" | 50,8 | 62 | 30 | -0,8 | 100 |
| SGB 160 | 60 | 40 | 2.3/8" | 60,0 | 72 | 30 | -0,8 | 145 |
| SGB 163 | 63 | 40 | 2.1/2" | 63,5 | 75 | 30 | -0,8 | 170 |
| SGB 170 | 70 | 44 | 2.3/4" | 70,0 | 82 | 30 | -0,8 | 210 |
| SGB 176 | 76 | 48 | 3" | 76,2 | 88 | 30 | -0,8 | 225 |
| SGB 180 | 80 | 50 | 3.1/8" | 80,0 | 94 | 30 | -0,8 | 240 |
| SGB 1102 | 100 | 64 | 4" | 102,0 | 116 | 30 | -0,8 | 305 |
| SGB 1110 | 110 | 69 | 4.3/8" | 110,0 | 125 | 30 | -0,6 | 335 |
| SGB 1127 | 125 | 80 | 5" | 127,0 | 145 | 30 | -0,6 | 460 |
| SGB 1152 | 150 | 96 | 6" | 152,0 | 170 | 30 | -0,6 | 580 |
DN = Nominal diameter, nominal width – Burst pressure: Safety factor = 3:1
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.