K-AFSV HANSA PRO
Start-up poppet valve, HANSA PROProduct image
Properties
Media temperature |
-10 °C to +50 °C |
Ambient temperature |
-10 °C to +50 °C |
Media |
Compressed air |
Design |
Operated by secondary pressure |
Mounting type |
Line mounting, mounting kit or wall mounting |
Installation position |
Any |
Nominal flow-rate G1/2 |
5.200 l/min (P1 = 6 bar/Delta P = 1 bar) |
Nominal flow-rate G 3/8 |
4.300 l/min (P1 = 6 bar/Delta P = 1 bar) |
PE max 11 |
16 bar |
Housing |
PA66 |
Item
Sort upwards
Sort downwards
Identification | Connection | Size |
---|---|---|
K- 07 25 22 60 | G 3/8 i | 2 |
K- 07 25 22 61 | G 1/2 i | 2 |
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.