Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
K-BKR STANDARD ZWEITEILIG VA
Ball valves
Product image
Properties
| Operating pressure |
max. 70 bar (depending on temperature and nominal size) |
| 1.1/4" to 1.1/2" |
20 °C: 70 bar, 60 °C: 55 bar, 100 °C: 35 bar, 150 °C: 6 bar, 180 °C: 4 bar, 200 °C: 0 bar |
| 1/4" bis 1" |
20 °C: 70 bar, 60 °C: 65 bar, 100 °C: 45 bar, 150 °C: 7 bar, 180 °C: 4 bar, 200 °C: 0 bar |
| 2" |
20 °C: 60 bar, 60 °C: 40 bar, 100 °C: 30 bar, 150 °C: 5 bar, 180 °C: 4 bar, 200 °C: 0 bar |
| Operating temperature |
200 °C at 0 bar |
| Seal |
15 % RPTFE (glass fibre reinforced PTFE) |
| Hand lever |
Stainless steel 1.4301 |
Description
Full bore
Note
G thread acc. to DIN EN ISO 228-1, with ISO flange plate (acc. to ISO 5211)
Further information on request
Item
Sort upwards
Sort downwards
 Identification |
DN | Thread | A (mm) |
B (mm) |
L (mm) |
Material |
|---|---|---|---|---|---|---|
| K- 07 30 00 01 | 8 | G 1/4 | 102,0 | 56,0 | 52,0 | Stainless steel 1.4401/1.4408 |
| K- 07 30 00 02 | 10 | G 3/8 | 102,0 | 56,0 | 52,0 | Stainless steel 1.4401/1.4408 |
| K- 07 30 00 03 | 15 | G 1/2 | 123,0 | 65,0 | 58,0 | Stainless steel 1.4401/1.4408 |
| K- 07 30 00 04 | 20 | G 3/4 | 123,0 | 68,0 | 67,0 | Stainless steel 1.4401/1.4408 |
| K- 07 30 00 05 | 25 | G 1 | 153,0 | 79,0 | 78,0 | Stainless steel 1.4401/1.4408 |
| K- 07 30 00 06 | 32 | G 1 1/4 | 153,0 | 84,0 | 90,0 | Stainless steel 1.4401/1.4408 |
| K- 07 30 00 07 | 40 | G 1 1/2 | 183,0 | 93,0 | 104,0 | Stainless steel 1.4401/1.4408 |
| K- 07 30 00 08 | 50 | G 2 | 183,0 | 99,0 | 127,0 | Stainless steel 1.4401/1.4408 |
Additional information
G thread acc. DIN EN ISO 228-1
Ordering information
For use on devices that have to be vented whenever they are turned off, either because of safety regulations or for technical reasons. The pneumatic devices are disconnected from the system and simultaneously vented each time they are shut off.
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.