K-DRG PNEU FERNGEST MULTIFIX
Pressure regulators with pneumatic remote controlProduct image
Properties
Input pressure |
Max. 16 bar |
Output pressure |
corresponds to the set pressure of the pilot pressure regulator |
Media temperature |
max. 60 °C |
Ambient temperature |
Max. 60 °C |
Sealant |
NBR |
Housing |
Die-cast zinc, Aluminium for G 1 variant |
Flow rate measurement |
At P1 = 8 bar, P2 = 6 bar and pressure drop Δp = 1 bar |
Pilot air connection |
G 1/8 |
Description
Diaphragm pressure regulator, self-relieving, with pneumatic remote control. The pressure is set with a pilot pressure regulator (1:1 ratio). Either a standard or a precision pressure regulator can be used to regulate the pilot pressure.
Note
Further information on request
Item
Sort upwards
Sort downwards
Identification | Circuit diagram | Thread | Flow rate (L/min) |
A (mm) |
B | C (mm) |
D (mm) |
---|---|---|---|---|---|---|---|
K- 07 25 19 56 | G 1/4 | 1800 | 48,0 | 75.0 mm | 48,0 | 27,0 | |
K- 07 25 19 57 | G 1/2 | 4800 | 69,0 | 94.0 mm | 59,0 | 35,0 | |
K- 07 25 19 58 | G 1 | 12500 | 100,0 | 112.0 mm | 60,0 | 52,0 |
Spare parts
- K-HALTERBAUSATZ MULTIFIX
- Holder
- K-KOPPELPAKET MEHR
- Coupling packet
- K-VERSCHLEI-SATZ MULTIFIX
- Set of wearing parts »multifix«
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.