Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
K-ENDPLATTEN V
End plate for HDM valve terminal
Product image
Properties
| Media |
Filtered, unlubricated or lubricated compressed air. If lubrication is used, it must be continuous. |
| Working pressure |
Max. vacuum 10 bar (external pilots), 3 to 7 bar (internal pilots as standard) |
| Pilot pressure |
3 - 7 bar |
| Temp. range |
-10 °C to +60 °C |
| Flow rate |
200 Nl/min (Ø 4), 500 Nl/min (Ø 6), 800 Nl/min (Ø 8) |
| No. of pilots |
Max. 16 (e.g. 16 spring return valves) |
| Operating principle |
Blind (terminates the system) |
| Manual control |
Latching (bistable), Monostable (non-latching) version also available on request |
| Power input |
0.6 W per pilot |
| Protection IP |
IP 65 |
Description
These compact valve terminals, with a maximum flow rate of 800 Nl/min, can be individually adapted to the specific conditions of each application thanks tot he wide range of functions and various input and intermediate plates.Since each valve terminal is a customer-specific combination of a series of individual elements, the catalogue only lists the available input, intermediate and end plates as well as the different valve discs and the 25-pin multi-pole connectors.
Note
Further information on request
Item
Identification Additional information
Important: The scope of supply does not include a connector. Please order separately.
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.