K-FILTERELEMENT
Filter elementProduct image
Item
Sort upwards
Sort downwards
Identification | Circuit diagram | Description | Size |
---|---|---|---|
K- 07 25 05 27 | Filter element 5 μm, cellpor | 1 | |
K- 07 25 05 28 | Filter element 5 μm, cellpor | - | |
K- 07 25 05 29 | Filter element 8 μm, sintered bronze | - | |
K- 07 25 05 30 | Filter element 40 μm, sintered bronze | - | |
K- 07 25 05 31 | Filter element 8 μm, sintered bronze | - | |
K- 07 25 05 32 | Filter element 40 μm, sintered bronze | - | |
K- 07 25 05 33 | Filter insert 5 μm, cellpor | - | |
K- 07 25 05 34 | Filter element 8 μm, cellpor | - | |
K- 07 25 05 35 | Filter element 40 μm, cellpor | - | |
K- 07 25 05 36 | Filter insert 40 μm, sintered bronze | - | |
K- 07 25 05 37 | Filter element 8 μm, sintered bronze | - | |
K- 07 25 05 38 | Filter element 60 μm, cellpor | - | |
K- 07 25 05 42 | Filter element 40 μm, sintered bronze | - | |
K- 07 25 05 49 | Filter element 50 μm, sintered bronze | - | |
K- 07 25 05 51 | Filter insert 40 μm, sintered bronze | - | |
K- 07 25 18 18 | Filter element 5 μm, cellpor | 4 | |
K- 07 25 18 19 | Filter element 5 μm, cellpor | 2 | |
K- 07 25 18 75 | Filter element 5 μm | - | |
K- 07 25 18 77 | Filter element 5 μm | 1 | |
K- 07 25 18 81 | Filter element 5 μm | 2 | |
K- 07 25 18 85 | Filter element 5 μm | 3 |
Accessory for following products
- K-FI PC-BEHAELTER HW G-MINI
- Filters
- K-FI REGL PC-BEHAELTER HW G-MINI
- Filter regulators
- K-WTEH 2-TLG PC-BEHAEL S W H G-MINI
- Service units, 2-piece with polycarbonate bowl and joiner for wall mounting, semi-automatic drain valve
- K-WTEH 3-TLG PC-BEHAEL S W H G-MINI
- Service units, 3-piece with polycarbonate bowl, bowl guard and joiner for wall mounting, semi-automatic drain valve
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.