K-FI VA
FiltersProduct image
Properties
Input pressure |
Max. 50 bar |
Media temperature |
max. 80 °C |
Ambient temperature |
Max. 80 °C |
Pore size in filter element |
50 μm |
Sealant |
FKM |
Material |
stainless steel 1.4404 (AISI 316L) |
Drain valve |
Locking screw |
Flow rate measurement |
At P1 = 6 bar and pressure drop Δp ≤ 0.6 bar |
Description
Stainless steel filters containing no non-ferrous metals for use in the food processing, chemical, mining, plant construction and special machinery industries as well as in the medical technology.
Note
Further information on request
Item
Sort upwards
Sort downwards
Identification | Thread | Flow rate (L/min) |
A (mm) |
B | C (mm) |
---|---|---|---|---|---|
K- 07 25 05 59 | G 1/4 | 2500 | 64,0 | 139.0 mm | 125,0 |
K- 07 25 05 58 | G 1/2 | 3400 | 80,0 | 150.0 mm | 130,0 |
Ordering information
Important: This is not a sterile filter! With filter element 5 μm available on request. With manual or fully automatic drain valve on request. With NPT threads available on request.
Accessories
- K-HALTERBAUSATZ
- Holder
Spare parts
- K-VERSCHLEI-SATZ
- Set of wearing parts
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.