K-GROSSDRUCKREGLER
Large pressure regulatorsProduct image
Properties
Input pressure |
Max. 40 bar |
Media temperature |
max. 60 °C |
Ambient temperature |
Max. 90 °C |
Flow rate |
2500 l/min |
Sealant |
NBR |
Housing |
Aluminium |
Flow rate measurement |
At P1 = 8 bar, P2 = 6 bar and pressure drop Δp = 1 bar |
Description
Diaphragm pressure regulators, independent of inlet pressure, with internal pilot control and self-relieving design. Separate indication of input and working pressure on two pressure gauges. The pressure setting can be locked by pushing the button down. We recommend always using these controllers in conjunction with our K-07250615 and K-07250615 filters.
Note
Further information on request
Item
Sort upwards
Sort downwards
Identification | Thread | Control range | A (mm) |
B | DN |
---|---|---|---|---|---|
K- 07 25 08 11 | G 1 1/2 | 0.5 - 6 bar | 180,0 | 246.0 mm | 50 |
K- 07 25 08 12 | G 1 1/2 | 0.5 - 10 bar | 180,0 | 246.0 mm | 50 |
K- 07 25 08 13 | G 1 1/2 | 0.5 - 16 bar | 180,0 | 246.0 mm | 50 |
K- 07 25 08 14 | G 1 1/2 | 0.5 - 25 bar | 180,0 | 246.0 mm | 50 |
K- 07 25 08 15 | G 2 | 0.5 - 6 bar | 160,0 | 246.0 mm | 50 |
K- 07 25 08 16 | G 2 | 0.5 - 10 bar | 160,0 | 246.0 mm | 50 |
K- 07 25 08 17 | G 2 | 0.5 - 16 bar | 160,0 | 246.0 mm | 50 |
K- 07 25 08 18 | G 2 | 0.5 - 25 bar | 160,0 | 246.0 mm | 50 |
Spare parts
- K-HALTERBAUSATZ
- Holder
- K-VERSCHLEI-SATZ
- Set of wearing parts
- K-XV AGM 2
- Double nipples, parallel male thread
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.