Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
K-GRUNDEJEKTION SBP-C
Basic ejectors »SBP-C« with blow-off valve, with integrated silencer
Product image
Properties
| Properties |
Vacuum generator with a single nozzle, available in six power ratings, with a high maximum vacuum value (85%) Connection of compressed air and vacuum with push-in coupling Basic housing with connection facility for a vacuum switch Maximum suction capacity with minimum compressed air consumption Minimum size, low weight Various power ratings for optimised air consumption |
| Application |
For universal use in handling systems with very high dynamic movements Handling all kinds of air-tight components For use in separation systems where space is restricted. Construction of ejector blocks for centralised or decentralised individual control of suction pads. |
| Nozzle system |
Brass |
| Connection |
Push-in coupling |
| Silencer |
Plastic |
| Body |
Impact-resistant plastic |
Description
Purely pneumatic vacuum ejector that operates on the Venturi principle. Compressed air enters the ejector at A and flows through the nozzle B. This results in a vacuum immediately behind the nozzle outlet, and air is drawn in through the vacuum inlet D. This air and the driving air leave the ejector via the silencer C.
Note
Further information on request
Item
Sort upwards
Sort downwards
 Identification |
Nozzlesize | suction valve rest position | Pneumatic connection | Vacuum inlet | Dimension |
|---|---|---|---|---|---|
| K- 07 45 01 19 | 1,0 | NO | 6 mm | 8 mm | 142mm x 15mm x 50mm |
| K- 07 45 01 21 | 1,5 | NO | 6 mm | 8 mm | 142mm x 15mm x 50mm |
| K- 07 45 01 23 | 2,0 | NO | 8 mm | 10 mm | 228mm x 20mm x 72mm |
| K- 07 45 01 25 | 2,5 | NO | 8 mm | 10 mm | 228mm x 20mm x 72mm |
Accessories
- K-ERSATZSCHALLDAEMPFER 1
- Replacement silencers
- K-GRUNDPLATTEN 1
- Base plate
- K-BEFESTIGUNGSSAETZE 1
- Mounting kit
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.