K-OEL WS TRENNER DRUKOSEP
»drukosep« oil-water separatorsProduct image
Properties
Container |
Polyethylene / Polypropylene |
Filter |
Polypropylene / activated carbon |
Description
For compressor capacities up to 3.5 m3/min. Why treat condensate? Condensate is produced whenever air is compressed. The amount of condensate depends on the size and operating time of the compressor. The condensate produced by oil-lubricated compressors can contain up to 2000 mg of oil per litre! According to § 7a of the Water Resources Policy Act, this condensate must be treated in line with the latest state of the art before it can be introduced into the public sewer system.
The maximum limit is 20 mg of oil per litre of water. If the condensate is not treated, it must be collected and disposed of by a specialist firm upon proof. »drukosep« separates the oil from the condensate with a combination of coalescence and activated carbon filters. The cleaned water can be discharged into the public sewer system, while the waste oil collects in the combination filter and can be disposed of together with it. Benefits of »drukosep«: Compact design, Secure wall or floor mounting, 3-stage combination filter, Test glass for the cleaned condensate.
Note
Further information on request
Item
Sort upwards
Sort downwards
Identification | max. compressor performance (m3/min) |
Height (mm) |
Width (mm) |
Depth (mm) |
Weight (kg) |
---|---|---|---|---|---|
K- 07 25 09 25 | 1,5 | 445 | 251,0 | 240,0 | 4,3 |
K- 07 25 09 26 | 2,5 | 545 | 251,0 | 240,0 | 5,5 |
K- 07 25 09 27 | 3,5 | 613 | 373,0 | 291,0 | 9,0 |
Accessories
- K-ZUBEH DRUKOSEP
- Accessories for oil-water separators
Spare parts
- K-ERSATZFILTERSET DRUOSEP
- Replacement filter set for oil-water separators
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.