K-ZFL VENTILINSEL HDM
Intermediate plates for HDM valve terminal
Product image
![K-ZFL VENTILINSEL HDM K-ZFL VENTILINSEL HDM](/data/img/product/00020178_0.jpg)
Properties
Media |
Filtered, unlubricated or lubricated compressed air. If lubrication is used, it must be continuous. |
Working pressure |
Max. vacuum 10 bar (external pilots), 3 to 7 bar (internal pilots as standard) |
Pilot pressure |
3 - 7 bar |
Temp. range |
-10 °C to +60 °C |
Flow rate |
200 Nl/min (Ø 4), 500 Nl/min (Ø 6), 800 Nl/min (Ø 8) |
No. of pilots |
Max. 16 (e.g. 16 spring return valves) |
Manual control |
Latching (bistable), Monostable (non-latching) version also available on request |
Power input |
0.6 W per pilot |
Protection IP |
IP 65 |
Description
These compact valve terminals, with a maximum flow rate of 800 Nl/min, can be individually adapted to the specific conditions of each application thanks tot he wide range of functions and various input and intermediate plates.Since each valve terminal is a customer-specific combination of a series of individual elements, the catalogue only lists the available input, intermediate and end plates as well as the different valve discs and the 25-pin multi-pole connectors.
Note
Further information on request
Item
![](/images/up.gif)
Sort upwards
Sort downwards
![]() |
Function |
---|---|
K- 07 15 22 51 | With additional pilots and exhausts |
K- 07 15 22 52 | With separate pilots (for multi-pressure systems) |
K- 07 15 22 44 | With separate exhausts (for multi-pressure system) |
Additional information
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.