HANSA-FLEX AG
You are using Internet Explorer.
Deactivate the compatability mode if necessary, to experience the catalog the best way.

search Find

Search help

English

Select language

Date: 2017-10-19

K-ZWEIHAND S VENTILE O GEH

Two-hand safety valve without housing
Hide product imageProduct image
K-ZWEIHAND S VENTILE O GEH
Hide propertiesProperties
Media Filtered, unlubricated compressed air
Operating pressure 2.5 - 8 bar
Temp. range -10 °C to +60 °C
Connection Push-in fitting for pipe 4 mm
Operation Pneumatic
Flow rate air 6bar 85 Nl/min
max. time-offset input signal 0,4 s
Hide descriptionDescription

This pushbutton panel according to EN574 Type III A is comprised of a dual manual control valve with a housing and manifold. The valve only generates an output signal if two synchronised input signals are received within < 0.4 sec. If one input signal is interrupted, the output signal is interrupted as well. An emergency stop valve with a mushroom pushbutton is included. The housing can be screwed to the wall in any position. The valve manifold can optionally be supplied without the housing and with a DIN bar adapter.Applications: Two-hand safety valve for start-of-cycle control on a pneumatically operated machine.

Hide informationNote

Further information on request

Hide product tableItem

Sort upwards

Sort downwards

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.