Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
NY 800 NC (R8)
Thermoplastic high pressure hose, electrically nonconductive
Product image
Properties
| Application |
High pressure circuits general application |
| Special features |
high ozone and abrasion resistance very good reverse bending fatigue strength slight volumetric expansion |
| Standard |
SAE J517 - 100 R8 Non Conductive |
| Inner layer |
Polyester elastomer |
| Insert |
one aramide braided insert |
| Outer layer |
Polyurethane |
| Colour |
orange |
| Temp. min. |
-40 °C |
| Temp. max. |
100 °C |
| Elongation |
+ 0 % to - 1 % |
| Media |
Mineral oil Synthetic oils Water-oil emulsions (up to 60°C) Water (0°C to + 60°C) |
Note
Electrical conductivity < 50μA to DIN EN 855
Item
Sort upwards
Sort downwards
 Identification |
DN* | Size | Inches | Internal Ø (mm) |
External Ø (mm) |
Operating pressure (bar) |
Burst pressure (bar) |
Min. bending radius (mm) |
|---|---|---|---|---|---|---|---|---|
| NY 804 NC | 5 | 3 | 3/16" | 5,0 | 8,9 | 350,0 | 1400 | 30 |
| NY 806 NC | 6 | 4 | 1/4" | 6,5 | 11,5 | 350,0 | 1400 | 50 |
| NY 808 NC | 8 | 5 | 5/16" | 8,1 | 13,4 | 300,0 | 1200 | 55 |
| NY 810 NC | 10 | 6 | 3/8" | 9,7 | 15,5 | 280,0 | 1120 | 60 |
| NY 813 NC | 12 | 8 | 1/2" | 13,0 | 19,9 | 245,0 | 980 | 80 |
| NY 820 NC | 19 | 12 | 3/4" | 19,5 | 26,9 | 165,0 | 660 | 150 |
| NY 825 NC | 25 | 16 | 1" | 25,9 | 34,2 | 140,0 | 560 | 200 |
DN = Nominal diameter, nominal width
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.