Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
PN FL 90 VA
Swage nipple, BEL angle 90°
Product image
90_MEx.gif "PN FL 90 VA - data/img/product/PNxxFL(FS,FF)90_MEx.gif")
Properties
| Application |
Swage nipple for HD 100 to HD 400, KP and TE hoses |
| Connection 1 |
Pipe sockets |
| Sealing form 1 |
Cutting ring connection |
| Short code |
BEL |
| Standard |
ISO 8434-1 |
| Series |
light |
| Material |
Stainless steel |
Note
Final cutting ring assembly must be carried out in the hardened pre-assembly socket (VOM...).
Choose the appropriate ferrule based on the hose type.
Do not use for new designs; we recommend: PN...AOL...90 VA.
Item
Sort upwards
Sort downwards
 Identification |
DN | Size | Inches | Operating pressure (bar) |
D2 (mm) |
L1 (mm) |
L2 (mm) |
|---|---|---|---|---|---|---|---|
| PN 06 FL 04 90 VA | 6 | 4 | 1/4" | 250,0 | 6,0 | 62,3 | 32,5 |
| PN 06 FL 90 VA | 6 | 4 | 1/4" | 250,0 | 8,0 | 68,3 | 37,0 |
| PN 06 FL 08 90 VA | 6 | 4 | 1/4" | 250,0 | 10,0 | 72,8 | 40,0 |
| PN 08 FL 90 VA | 8 | 5 | 5/16" | 250,0 | 10,0 | 70,8 | 41,5 |
| PN 08 FL 10 90 VA | 8 | 5 | 5/16" | 250,0 | 12,0 | 77,8 | 45,0 |
| PN 10 FL 08 90 VA | 10 | 6 | 3/8" | 250,0 | 10,0 | 70,8 | 41,5 |
| PN 10 FL 90 VA | 10 | 6 | 3/8" | 250,0 | 12,0 | 77,8 | 45,0 |
| PN 13 FL 90 VA | 12 | 8 | 1/2" | 250,0 | 15,0 | 84,8 | 49,0 |
| PN 16 FL 90 VA | 16 | 10 | 5/8" | - | 18,0 | 93,0 | 65,0 |
| PN 20 FL 90 VA | 19 | 12 | 3/4" | - | 22,0 | 112,0 | 75,5 |
| PN 25 FL 90 VA | 25 | 16 | 1" | 100,0 | 28,0 | 127,5 | 98,0 |
| PN 32 FL 90 VA | 31 | 20 | 1.1/4" | 100,0 | 35,0 | 174,0 | 127,0 |
| PN 40 FL 90 VA | 38 | 24 | 1.1/2" | 100,0 | 42,0 | 174,0 | 127,0 |
Product versions
This product is also available in the following designs:
- PN FL 90
- Swage nipple, BEL angle 90°, Steel
Additional elements
- VOM
- Pre-assembly sockets
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.