SRS 1-6 PP G
Pipe clamp, light seriesProduct image
Properties
Design |
Single pipe clamp |
Construction type |
Inside of clamp, smooth |
Series |
light |
Standard |
DIN 3015-1 |
Temp. min. |
-30 °C |
Temp. max. |
90 °C |
Material |
Polypropylene |
Note
The use of clamps with a smooth inner surface is recommended for retaining hoses and cables. No pretension is applied when fitting and the block height H is reduced to the gap width S1.
Item
Sort upwards
Sort downwards
Identification | External pipe Ø d2 (mm) |
External pipe Ø d2 | Clamp size | e1 (mm) |
H (mm) |
L (mm) |
S1 (mm) |
---|---|---|---|---|---|---|---|
SRS 106 A PP G | 6,0 | - | 1 | 20 | 27 | 34 | 0,6 |
SRS 106.4 A PP G | 6,4 | 1/4" | 1 | 20 | 27 | 34 | 0,6 |
SRS 108 A PP G | 8,0 | 5/16" | 1 | 20 | 27 | 34 | 0,6 |
SRS 109.5 A PP G | 9,5 | 3/8" | 1 | 20 | 27 | 34 | 0,6 |
SRS 110 A PP G | 10,0 | - | 1 | 20 | 27 | 34 | 0,6 |
SRS 112 A PP G | 12,0 | - | 1 | 20 | 27 | 24 | 0,6 |
SRS 0212.7 PP G | 12,7 | 1/2" | 2 | 26 | 33 | 40 | 0,8 |
SRS 0213.5 PP G | 13,5 | - | 2 | 26 | 33 | 40 | 0,8 |
SRS 0214 PP G | 14,0 | - | 2 | 26 | 33 | 40 | 0,8 |
SRS 0215 PP G | 15,0 | - | 2 | 26 | 33 | 40 | 0,8 |
SRS 0216 PP G | 16,0 | 5/8" | 2 | 26 | 33 | 40 | 0,8 |
SRS 0217.2 PP G | 17,2 | - | 2 | 26 | 33 | 40 | 0,8 |
SRS 0218 PP G | 18,0 | - | 2 | 26 | 33 | 40 | 0,8 |
SRS 0319 PP G | 19,0 | 3/4" | 3 | 33 | 35 | 48 | 1,0 |
SRS 0320 PP G | 20,0 | - | 3 | 33 | 35 | 48 | 1,0 |
SRS 0321.3 PP G | 21,3 | - | 3 | 33 | 35 | 48 | 1,0 |
SRS 0322 PP G | 22,0 | - | 3 | 33 | 35 | 48 | 1,0 |
SRS 0323 PP G | 23,0 | - | 3 | 33 | 35 | 48 | 1,0 |
SRS 0325 PP G | 25,0 | 1" | 3 | 33 | 35 | 48 | 1,0 |
SRS 0426.9 PP G | 26,9 | - | 4 | 40 | 42 | 57 | 1,2 |
SRS 0428 PP G | 28,0 | - | 4 | 40 | 42 | 57 | 1,2 |
SRS 0430 PP G | 30,0 | - | 4 | 40 | 42 | 57 | 1,2 |
SRS 0532 PP G | 32,0 | 1.1/4" | 5 | 52 | 58 | 70 | 1,2 |
SRS 0533.7 PP G | 33,7 | - | 5 | 52 | 58 | 70 | 1,2 |
SRS 0535 PP G | 35,0 | - | 5 | 52 | 58 | 70 | 1,2 |
SRS 0538 PP G | 38,0 | 1.1/2" | 5 | 52 | 58 | 70 | 1,2 |
SRS 0540 PP G | 40,0 | - | 5 | 52 | 58 | 70 | 1,2 |
SRS 0542 PP G | 42,0 | - | 5 | 52 | 58 | 70 | 1,2 |
SRS 0644.5 PP G | 44,5 | 1.3/4" | 6 | 66 | 66 | 86 | 1,2 |
SRS 0648 PP G | 48,0 | - | 6 | 66 | 66 | 86 | 1,2 |
SRS 0650 PP G | 50,0 | - | 6 | 66 | 66 | 86 | 1,2 |
SRS 0650.8 PP G | 50,8 | 2" | 6 | 66 | 66 | 86 | 1,2 |
SRS 0652 PP G | 52,0 | - | 6 | 66 | 66 | 86 | 1,2 |
SRS 0655 PP G | 55,0 | - | 6 | 66 | 66 | 86 | 1,2 |
SRS 0657 PP G | 57,0 | 2.1/4" | 6 | 66 | 66 | 86 | 1,2 |
Ordering information
1 piece = 2 halves of clamp
Product versions
This product is also available in the following designs:
- SRS 1-6 AL
- Pipe clamp, light series, Inside of clamp with web
- SRS 1-6 PA
- Pipe clamp, light series, Inside of clamp with web
- SRS 1-6 PA G
- Pipe clamp, light series, Inside of clamp, smooth
- SRS 1-6 PP
- Pipe clamp, light series, Inside of clamp with web
- SRS 1-6 VG
- Pipe clamp, light series, Inside of clamp, smooth
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.