Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
GT
Guide band, GT
Product image
Properties
| Design |
Guide band |
| Sliding speed max. |
15,0 m/s |
| Surface pressure |
2.5 N/mm2 |
| Temp. min. |
-100 °C |
| Temp. max. |
200 °C |
| Media |
Mineral oils |
| Installation |
insert into the groove |
| Material |
PTBR |
Description
Available by the metre.
Low coefficient of friction.
No stick-slip.
Easy working of the fitting groove and assembly.
Note
Calculation of shear force; F= p x D x L x n
F= maximum shear force (N)
p = maximum surface pressure (N/mm2)
D x L= projected area (mm2)
n= quantity of rings
Item
Sort upwards
Sort downwards
 Identification |
e (mm) |
L (mm) |
|---|---|---|
| GT 15 025-55 | 1,50 | 2,5 |
| GT 15 032-55 | 1,50 | 3,2 |
| GT 15 040-55 | 1,55 | 4,0 |
| GT 15 042-30 | 1,50 | 4,2 |
| GT 15 042-55 | 2,00 | 4,2 |
| GT 15 063-55 | 1,50 | 6,3 |
| GT 15 081-55 | 1,50 | 8,1 |
| GT 15 097-55 | 1,50 | 9,7 |
| GT 15 100-55 | 1,50 | 10,0 |
| GT 15 200-55 | 1,50 | 20,0 |
| GT 20 042-55 | 2,00 | 4,2 |
| GT 20 063-55 | 2,00 | 6,3 |
| GT 20 081-55 | 2,00 | 8,1 |
| GT 20 097-55 | 2,00 | 9,7 |
| GT 20 100-55 | 2,00 | 10,0 |
| GT 20 120-55 | 2,00 | 12,0 |
| GT 20 150-55 | 2,00 | 15,0 |
| GT 20 200-55 | 2,00 | 20,0 |
| GT 20 250-55 | 2,00 | 25,0 |
| GT 20 300-55 | 2,00 | 30,0 |
| GT 25 042-55 | 2,50 | 4,2 |
| GT 25 056-55 | 2,50 | 5,6 |
| GT 25 063-55 | 2,50 | 6,3 |
| GT 25 081-55 | 2,50 | 8,1 |
| GT 25 097-55 | 2,50 | 9,7 |
| GT 25 100-55 | 2,50 | 10,0 |
| GT 25 128-55 | 2,50 | 12,8 |
| GT 25 150-55 | 2,50 | 15,0 |
| GT 25 200-55 | 2,50 | 20,0 |
| GT 25 250-55 | 2,50 | 25,0 |
| GT 25 300-55 | 2,50 | 30,0 |
| GT 25 400-55 | 2,50 | 40,0 |
| GT 30 096-55 | 3,00 | 9,6 |
| GT 30 128-55 | 3,00 | 12,8 |
| GT 30 150-55 | 3,00 | 15,0 |
| GT 30 200-55 | 3,00 | 20,0 |
| GT 30 250-55 | 3,00 | 25,0 |
| GT 30 300-55 | 3,00 | 30,0 |
| GT 30 400-55 | 3,00 | 40,0 |
| GT 40 081-55 | 4,00 | 8,1 |
| GT 40 097-55 | 4,00 | 9,7 |
| GT 40 250-55 | 4,00 | 25,0 |
| GT 40 500-55 | 4,00 | 50,0 |
Ordering information
For special operating conditions (fluid, temperature, pressure ...) please contact us.
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.