WR FUEHRUNG
Guide WR
Product image
![WR FUEHRUNG WR FUEHRUNG](/data/img/product/WR_FOTO_LG.jpg)
![WR FUEHRUNG - data/img/product/WR_Fuehrung_2_LG.jpg data/img/product/WR_Fuehrung_2_LG.jpg - WR FUEHRUNG](/data/img/product/WR_Fuehrung_2_LG.jpg)
Properties
Design |
Double guide ring |
Sliding speed max. |
5,0 m/s |
Surface pressure |
at 20°C 15 N/mm2; at 100°C 10 N/mm3 |
Temp. min. |
-30 °C |
Temp. max. |
110 °C |
Media |
Mineral oils |
Installation |
insert into the groove |
Material |
acetal resin + glass fibre |
Description
Easy working of the fitting groove and assembly.
High load-bearing capacity.
Low coefficient of wear and low coefficient of friction (between 0.05 and 0.1) available in many sizes.
Note
Calculation of shear force; F= p x D x L x n
F= maximum shear force (N)
p = maximum surface pressure (N/mm2)
D x L= projected area (mm2)
n= quantity of rings
Item
![](/images/up.gif)
Sort upwards
Sort downwards
![]() |
d (mm) |
D (mm) |
D (mm) |
L (mm) |
---|---|---|---|---|
WR 16-0 | 16 | 19,1 | - | 4,0 |
WR 20 | 20 | - | 25 | 5,6 |
WR 20-1 | 20 | - | 25 | 9,7 |
WR 22 | 22 | 27,0 | - | 5,6 |
WR 22-1 | 22 | 27,0 | - | 9,7 |
WR 25-1 | 25 | - | 30 | 9,7 |
WR 27 | 27 | - | 32 | 5,6 |
WR 30 | 30 | - | 35 | 5,6 |
WR 25 | 25 | 30,0 | - | 5,6 |
WR 30-1 | 30 | - | 35 | 9,7 |
WR 27-1 | 27 | 32,0 | - | 9,7 |
WR 32 | 32 | - | 37 | 5,6 |
WR 28 | 28 | 33,0 | - | 5,6 |
WR 35 | 35 | - | 40 | 5,6 |
WR 35-1 | 35 | - | 40 | 9,7 |
WR 28-1 | 28 | 33,0 | - | 9,7 |
WR 36-1 | 36 | - | 41 | 9,7 |
WR 32-1 | 32 | 37,0 | - | 9,7 |
WR 40 | 40 | - | 45 | 5,6 |
WR 36 | 36 | 41,0 | - | 5,6 |
WR 40-1 | 40 | - | 45 | 9,7 |
WR 40-2 | 40 | 45,0 | - | 15,0 |
WR 45 | 45 | - | 50 | 5,6 |
WR 45-1 | 45 | - | 50 | 9,7 |
WR 43 | 43 | 48,0 | - | 5,6 |
WR 50 | 50 | - | 55 | 5,6 |
WR 50-1 | 50 | - | 55 | 9,7 |
WR 45-2 | 45 | 50,0 | - | 15,0 |
WR 55-1 | 55 | - | 60 | 9,7 |
WR 47 | 47 | 52,0 | - | 5,6 |
WR 56-1 | 56 | - | 61 | 9,7 |
WR 47-1 | 47 | 52,0 | - | 9,7 |
WR 58 | 58 | - | 63 | 5,6 |
WR 50-2 | 50 | 55,0 | - | 15,0 |
WR 55 | 55 | 60,0 | - | 5,6 |
WR 63 | 63 | - | 68 | 5,6 |
WR 56 | 56 | 61,0 | - | 5,6 |
WR 58-1 | 58 | - | 63 | 9,7 |
WR 63-1 | 63 | - | 68 | 9,7 |
WR 60 | 60 | - | 65 | 5,6 |
WR 60-1 | 60 | - | 65 | 9,7 |
WR 60-2 | 60 | 65,0 | - | 15,0 |
WR 65 | 65 | - | 70 | 5,6 |
WR 65-1 | 65 | - | 70 | 9,7 |
WR 67 | 67 | - | 75 | 5,6 |
WR 67-1 | 67 | 72,0 | - | 9,7 |
WR 70 | 70 | - | 75 | 5,6 |
WR 70-1 | 70 | - | 75 | 9,7 |
WR 70-2 | 70 | 75,0 | - | 15,0 |
WR 70-3 | 70 | 75,0 | - | 20,0 |
WR 75 | 75 | - | 80 | 5,6 |
WR 72-1 | 72 | 77,0 | - | 9,7 |
WR 75-1 | 75 | - | 80 | 9,7 |
WR 75-2 | 75 | 80,0 | - | 15,0 |
WR 80-1 | 80 | - | 85 | 9,7 |
WR 80-2 | 80 | 85,0 | - | 15,0 |
WR 85 | 85 | - | 90 | 5,6 |
WR 80 | 80 | 85,0 | - | 5,6 |
WR 85-1 | 85 | - | 90 | 9,7 |
WR 83-2 | 83 | 88,0 | - | 15,0 |
WR 85-2 | 85 | 90,0 | - | 15,0 |
WR 95 | 95 | - | 100 | 5,6 |
WR 90-1 | 90 | - | 95 | 9,7 |
WR 90 | 90 | 95,0 | - | 5,6 |
WR 95-1 | 95 | - | 100 | 9,7 |
WR 92-4 | 92 | 97,0 | - | 25,0 |
WR 95-2 | 95 | 100,0 | - | 15,0 |
WR 100-2 | 100 | 105,0 | - | 15,0 |
WR 100 | 100 | 105,0 | - | 5,6 |
WR 100-1 | 100 | 105,0 | - | 9,7 |
WR 105-2 | 105 | 110,0 | - | 15,0 |
WR 105-1 | 105 | 110,0 | - | 9,7 |
WR 110-2 | 110 | 115,0 | - | 15,0 |
WR 110-1 | 110 | 115,0 | - | 9,7 |
WR 115-1 | 115 | 120,0 | - | 9,7 |
WR 120-2 | 120 | 125,0 | - | 15,0 |
WR 120 | 120 | 125,0 | - | 5,6 |
WR 120-1 | 120 | - | 125 | 9,7 |
WR 125-2 | 125 | 130,0 | - | 15,0 |
WR 135-2 | 135 | 140,0 | - | 15,0 |
WR 155-2 | 155 | 160,0 | - | 15,0 |
WR 195-2 | 195 | 200,0 | - | 15,0 |
Ordering information
We are able to produce guide rings with diameters of 20 to 510 mm with short lead times.
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.