HANSA-FLEX AG
You are using Internet Explorer.
Deactivate the compatability mode if necessary, to experience the catalog the best way.

search Find

Search help

English

Select language

Date: 2017-10-19

E-DWR

Piston guide E-DWR
Hide product imageProduct image
E-DWR data/img/product/E-DWR_Zeichnung_1.jpg - E-DWR
Hide propertiesProperties
Design Guide ring
Sliding speed max. 0,8 m/s
Surface pressure at 20°C 15 N/mm2; at 100°C 10 N/mm3
Temp. min. -30 °C
Temp. max. 110 °C
Media Mineral oils
Water emulsions
Installation insert into the groove
Material acetal resin + glass fibre
Application Hydraulics
Hide descriptionDescription

Easy working of the fitting groove and assembly.
High load-bearing capacity.
Low coefficient of wear and low coefficient of friction (between 0.05 and 0.1) available in many sizes.

Hide informationNote

Calculation of shear force; F= p x D x L x n
F= maximum shear force (N)
p = maximum surface pressure (N/mm2)
D x L= projected area (mm2)
n= quantity of rings

Hide product tableItem

Sort upwards

Sort downwards

Hide ordering informationOrdering information

We are able to produce guide rings with diameters of 20 to 510 mm with short lead times.

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.