E-GTP
Piston guide E-GTP
Product image
![E-GTP E-GTP](/data/img/product/E-GTP_FOTO_1.jpg)
![E-GTP - data/img/product/E-GTP_Zeichnung_1.jpg data/img/product/E-GTP_Zeichnung_1.jpg - E-GTP](/data/img/product/E-GTP_Zeichnung_1.jpg)
Properties
Sliding speed max. |
1,0 m/s |
Pressure resistance as DIN 53454 (N/mm2) |
270 N/mm2 |
Surface pressure |
35 N/mm2 |
Temp. min. |
-40 °C |
Temp. max. |
120 °C |
Media |
Mineral oils |
Installation |
insert into the groove |
Material |
phenol resin-cotton fabric |
Description
Easy working of the fitting groove and assembly.
Low coefficient of friction.
High load-bearing capacity.
Note
Calculation of shear force; F= p x D x L x n
F= maximum shear force (N)
p = maximum surface pressure (N/mm2)
D x L= projected area (mm2)
n= quantity of rings
Item
![](/images/up.gif)
Sort upwards
Sort downwards
![]() |
D (mm) |
d (mm) |
L (mm) |
---|---|---|---|
EGTP 250 970 600 A | 60 | 55 | 9,7 |
EGTP 250 970 700 A | 70 | 65 | 9,7 |
EGTP 251 500 550 A | 55 | 50 | 15,0 |
EGTP 251 500 750 A | 75 | 70 | 15,0 |
EGTP 251 500 850 A | 85 | 80 | 15,0 |
EGTP 251 500 900 A | 90 | 85 | 15,0 |
EGTP 251 500 950 A | 95 | 90 | 15,0 |
EGTP 251 501 200 A | 120 | 115 | 15,0 |
EGTP 302 500 900 A | 90 | 85 | 15,0 |
EGTP 302 501 000 A | 100 | 94 | 25,0 |
EGTP 303 001 200 A | 120 | 114 | 30,0 |
EGTP 303 001 500 A | 150 | 144 | 30,0 |
EGTP 353 001 300 A | 130 | 123 | 30,0 |
EGTP 353 501 400 A | 140 | 133 | 35,0 |
EGTP 353 501 500 A | 150 | 143 | 35,0 |
EGTP 501 501 000 A | 100 | 90 | 15,0 |
EGTP 501 501 100 A | 110 | 100 | 15,0 |
EGTP 501 501 200 A | 120 | 110 | 15,0 |
EGTP 501 501 300 A | 130 | 120 | 15,0 |
EGTP 501 501 500 A | 150 | 140 | 15,0 |
EGTP 501 621 000 A | 100 | 90 | 16,2 |
EGTP 501 621 100 A | 110 | 100 | 16,2 |
EGTP 501 621 200 A | 120 | 110 | 16,2 |
EGTP 501 621 300 A | 130 | 120 | 16,2 |
EGTP 501 621 400 A | 140 | 130 | 16,2 |
EGTP 501 621 500 A | 150 | 140 | 16,2 |
EGTP 502 321 600 A | 160 | 150 | 23,2 |
EGTP 502 321 800 A | 180 | 170 | 23,2 |
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.