TAF 100
HD hose, type TAFProduct image
Properties
Application |
High pressure hydraulics and as supply line for technical media. |
Special features |
favourable flow properties high resistance to light, weathering, aging, chemical media |
Inner layer |
Polyamide |
Insert |
one polyester braided insert |
Outer layer |
NW 4: Polyamide; from NW 6: Polyurethane |
Colour |
black |
Temp. min. |
-60 °C |
Temp. max. |
100 °C |
Elongation |
+ 3 % to - 1 % |
Note
Fitting with press-fit and screw connections.
The change in length of the hose is determined at max. working pressure during testing to EN ISO 1402.
Item
Sort upwards
Sort downwards
Identification | DN* | Size | Inches | Internal Ø (mm) |
External Ø (mm) |
BD* at 20°C (bar) |
BD* at 50°C (bar) |
BD* at 80°C (bar) |
Min. bending radius (mm) |
---|---|---|---|---|---|---|---|---|---|
TAF 104 | 4 | 3 | 3/16" | 4,0 | 8,4 | 370,0 | 325 | 280 | 40 |
TAF 106 | 6 | 4 | 1/4" | 6,3 | 11,2 | 255,0 | 225 | 190 | 63 |
TAF 108 | 8 | 5 | 5/16" | 8,0 | 13,3 | 225,0 | 200 | 170 | 80 |
TAF 110 | 10 | 6 | 3/8" | 10,0 | 16,7 | 190,0 | 170 | 145 | 100 |
TAF 113 | 12 | 8 | 1/2" | 13,0 | 21,4 | 160,0 | 140 | 120 | 130 |
DN = Nominal diameter, nominal width – BD = Working pressure
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.