Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
TW-TUE MG
Tank truck fitting, brass
Product image
Properties
| Application |
Tankers |
| Connection 1 |
Hose connection |
| Connection 2 |
BSP nut thread |
| Sealing form 2 |
Flat seal |
| Design |
with safety collar |
| Standard |
DIN EN 14 420-5 |
| Scope of supply |
with PUR flat seal |
| Material |
Brass |
Item
Sort upwards
Sort downwards
 Identification |
DN* | Ø D (mm) |
G1 | Max. working pressure (bar) |
|---|---|---|---|---|
| TW-TUE 12 13 MG | 13 | 13,4 | G 1/2" -14 | 16 |
| TW-TUE 34 19 MG | 19 | 19,4 | G 3/4" -14 | 16 |
| TW-TUE 10 25 MG | 25 | 25,4 | G 1" -11 | 16 |
| TW-TUE 114 32 MG | 32 | 32,4 | G 1.1/4" -11 | 16 |
| TW-TUE 112 38 MG | 35 | 38,4 | G 1.1/2” | 16 |
| TW-TUE 20 50 MG | 50 | 50,4 | G 2" -11 | 16 |
| TW-TUE 212 63 MG | 63 | 60,4 | G 2.1/2" -11 | 16 |
| TW-TUE 30 75 MG | 75 | 75,4 | G 3" -11 | 16 |
| TW-TUE 40 100 MG | 100 | 100,4 | G 4" -11 | 16 |
DN = Nominal diameter, nominal width
Accessories
Accessory for following products
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.