W45 AB
Connector, angle 45°Product image
Properties
Connection 1 |
BSP nut thread |
Sealing form 1 |
60° outer cone |
Connection 2 |
BSP nut thread |
Sealing form 2 |
60° outer cone |
Design |
Connectors |
Construction |
Angle 45° |
Material |
Steel |
Surface |
electro galvanised |
Item
Sort upwards
Sort downwards
Identification | G1 + G2 | AF (mm) |
S1 | S2 |
---|---|---|---|---|
W45 AB 04 | G 1/4" -19 | 14 | 19 | 19 |
W45 AB 06 | G 3/8" -19 | 19 | 22 | 22 |
W45 AB 08 | G 1/2" -14 | 22 | 27 | 27 |
W45 AB 12 | G 3/4" -14 | 27 | 32 | 32 |
W45 AB 16 | G 1" -11 | 33 | 41 | 41 |
SW, S1, S2 = With across flats
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.