K-KONSTANT DRUCKREGLER STANDARD 2
Constant-pressure regulatorsSlika proizvoda
Osobine
Ulazni pritisak |
Max. 25 bar (G 1/4 to G 1/2), Max. 40 bar (G 3/4 to G 1 1/2) |
Temperatura medija |
max. 60 °C |
Temperatura okoline |
Max. 90 °C |
Zaptivni materijal |
NBR |
Kućište |
Die-cast zinc for (G 1/4 to G 1/2), for Brass (G 3/4 to G 1 1/2) |
Merenje vrednosti protoka |
At P1 = 8 bar, P2 = 6 bar and pressure drop Δp = 1 bar |
Ostali podaci |
User manual on request |
Opis
Reversible diaphragm pressure regulators, independent of inlet pressure, with self-relieving design. The pressure regulators maintain a constant working pressure regardless of variations in the inlet pressure.
Artikal
sortiranje nagore
sortiranje nadole
Naziv | Navoj | Opseg regulacije | Protok (L/min) |
A (mm) |
B | C (mm) |
D (mm) |
DN |
---|---|---|---|---|---|---|---|---|
K- 07 25 03 98 | G 3/4 | 0.5 - 3 bar | 8700 | 116,0 | 93,0 mm | 43,0 | 177,0 | 20 |
K- 07 25 03 99 | G 3/4 | 0.5 - 6 bar | 8200 | 116,0 | 93,0 mm | 43,0 | 177,0 | 20 |
K- 07 25 04 00 | G 3/4 | 0.5 - 10 bar | 7830 | 116,0 | 93,0 mm | 43,0 | 177,0 | 20 |
K- 07 25 04 01 | G 3/4 | 0.5 - 16 bar | 7400 | 116,0 | 93,0 mm | 43,0 | 172,0 | 20 |
K- 07 25 04 02 | G 3/4 | 0.5 - 25 bar | 6500 | 116,0 | 93,0 mm | 43,0 | 172,0 | 20 |
K- 07 25 04 03 | G 1 | 0.5 - 3 bar | 8700 | 116,0 | 81,0 mm | 43,0 | 177,0 | 20 |
K- 07 25 04 04 | G 1 | 0.5 - 6 bar | 8200 | 116,0 | 81,0 mm | 43,0 | 177,0 | 20 |
K- 07 25 04 05 | G 1 | 0.5 - 10 bar | 7830 | 116,0 | 81,0 mm | 43,0 | 177,0 | 20 |
K- 07 25 04 06 | G 1 | 0.5 - 16 bar | 7400 | 116,0 | 81,0 mm | 43,0 | 172,0 | 20 |
K- 07 25 04 07 | G 1 | 0.5 - 25 bar | 6500 | 116,0 | 81,0 mm | 43,0 | 172,0 | 20 |
K- 07 25 04 08 | G 1 1/4 | 0.5 - 3 bar | 16000 | 114,0 | 126,0 mm | 48,0 | 189,0 | 25 |
K- 07 25 04 09 | G 1 1/4 | 0.5 - 6 bar | 14000 | 114,0 | 126,0 mm | 48,0 | 189,0 | 25 |
K- 07 25 04 10 | G 1 1/4 | 0.5 - 10 bar | 12160 | 114,0 | 126,0 mm | 48,0 | 189,0 | 25 |
K- 07 25 04 11 | G 1 1/4 | 0.5 - 16 bar | 11000 | 114,0 | 126,0 mm | 48,0 | 184,0 | 25 |
K- 07 25 04 12 | G 1 1/4 | 0.5 - 25 bar | 8500 | 114,0 | 126,0 mm | 48,0 | 184,0 | 25 |
K- 07 25 04 13 | G 1 1/2 | 0.5 - 3 bar | 16000 | 114,0 | 114,0 mm | 48,0 | 189,0 | 25 |
K- 07 25 04 14 | G 1 1/2 | 0.5 - 6 bar | 14000 | 114,0 | 114,0 mm | 48,0 | 189,0 | 25 |
K- 07 25 04 15 | G 1 1/2 | 0.5 - 10 bar | 12160 | 114,0 | 114,0 mm | 48,0 | 189,0 | 25 |
K- 07 25 04 16 | G 1 1/2 | 0.5 - 16 bar | 11000 | 114,0 | 114,0 mm | 48,0 | 184,0 | 25 |
K- 07 25 04 17 | G 1 1/2 | 0.5 - 25 bar | 8500 | 114,0 | 114,0 mm | 48,0 | 184,0 | 25 |
Rezervni delovi
- K-HALTERBAUSATZ STANDARD
- Holder
- K-VERSCHLEI-SATZ
- Set of wearing parts
- K-RD NIPPEL KURZ 1
- Reducing nipples, short type
- K-XV AGM 2
- Double nipples, parallel male thread
Isključenje od odgovornosti
Uprkos pažljivom proveravanju, ne možemo isključiti greške i ne preuzimamo nikakvu garanciju za navedene podatke.
Svi podatci u našem onlajn katalogu počivaju na trenutno važećim normama i propisa od strane stručnih udruženja. Samo pridržavanje naših propisa uvezi montaže Vam garantuje sigurnost proizvoda. Ne pridržavanje svih navedenih propisa može negativno uticati na funkcionalnu sigurnost proizvoda i do gubitka prava na garanciju. Naša garancija au svakom slučaju važi sa proizvode firme HANSA-FLEX. Naši proizvodi se stalno dalje razvijaju, te zadržavamo prava na tehničke izmene.