K-GRUNDEJEKTION SBP-C
Basic ejectors »SBP-C« with blow-off valve, with integrated silencerSlika proizvoda
Osobine
Osobine |
Vacuum generator with a single nozzle, available in six power ratings, with a high maximum vacuum value (85%) Connection of compressed air and vacuum with push-in coupling Basic housing with connection facility for a vacuum switch Maximum suction capacity with minimum compressed air consumption Minimum size, low weight Various power ratings for optimised air consumption |
Primena |
For universal use in handling systems with very high dynamic movements Handling all kinds of air-tight components For use in separation systems where space is restricted. Construction of ejector blocks for centralised or decentralised individual control of suction pads. |
Sistem dizni |
Brass |
Priključak |
Push-in coupling |
Prigušnik |
Plastic |
Osnovno telo |
Impact-resistant plastic |
Opis
Purely pneumatic vacuum ejector that operates on the Venturi principle. Compressed air enters the ejector at A and flows through the nozzle B. This results in a vacuum immediately behind the nozzle outlet, and air is drawn in through the vacuum inlet D. This air and the driving air leave the ejector via the silencer C.
Napomena
Ostali podaci na upit.
Artikal
sortiranje nagore
sortiranje nadole
Naziv | Veličina dizne | Položaj mirovanja ventila za usisavanje | Priključak za komprimovani vazduh | Vakuumski priključak | Dimenzije |
---|---|---|---|---|---|
K- 07 45 01 19 | 1,0 | NO | 6 mm | 8 mm | 142mm x 15mm x 50mm |
K- 07 45 01 21 | 1,5 | NO | 6 mm | 8 mm | 142mm x 15mm x 50mm |
K- 07 45 01 23 | 2,0 | NO | 8 mm | 10 mm | 228mm x 20mm x 72mm |
K- 07 45 01 25 | 2,5 | NO | 8 mm | 10 mm | 228mm x 20mm x 72mm |
Pribor
- K-ERSATZSCHALLDAEMPFER 1
- Replacement silencers
- K-GRUNDPLATTEN 1
- Base plate
- K-BEFESTIGUNGSSAETZE 1
- Mounting kit
Isključenje od odgovornosti
Uprkos pažljivom proveravanju, ne možemo isključiti greške i ne preuzimamo nikakvu garanciju za navedene podatke.
Svi podatci u našem onlajn katalogu počivaju na trenutno važećim normama i propisa od strane stručnih udruženja. Samo pridržavanje naših propisa uvezi montaže Vam garantuje sigurnost proizvoda. Ne pridržavanje svih navedenih propisa može negativno uticati na funkcionalnu sigurnost proizvoda i do gubitka prava na garanciju. Naša garancija au svakom slučaju važi sa proizvode firme HANSA-FLEX. Naši proizvodi se stalno dalje razvijaju, te zadržavamo prava na tehničke izmene.