Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
ASW
PTFE smooth hose
Item
Create PDF 
Additional documents
HF-Fragebogen zur Auswahl von Metall-Schlauchleitungen_DE.pdf
HF-Questionnaire Choice of Metal Hose Lines_EN.pdf
HF-Technische_Informationen_Metallschläuche_DE.pdf
HF-Technical_Information_Metal_Hoses_EN.pdf
Product image
Properties
| Application |
Well suited for high and low pressure applications with small bending radii |
| Application |
Mainly for the chemical and food industries |
| Design |
Smooth inliner in white PTFE |
| Properties |
The smooth inner liner prevents residue buildup in the hose Suitable for use with foodstuffs |
| Hose material |
PTFE (polytetrafluoroethylene) |
| Braiding |
without braiding outer vacuum support spiral |
| Temp. min. |
-70 °C |
| Temp. max. |
260 °C |
| Temp. |
applies for the hose only |
| Material |
PTFE (polytetrafluoroethylene) |
| Approval |
the base material has been granted FDA approval. |
Note
The pressure values listed apply to hoses only.
The tubular fabric has a safety factor (SF) 4 against bursting
From 120 °C the pressure reduction factor is to be taken into account.
(Max. operating pressure = operating pressure x factor).
Temp.: 120 °C / 140 °C / 160 °C / 180 °C / 200 °C / 220 °C
Factor: 1,00 / 0,80 / 0,60 / 0,40 / 0,20 / 0,00
Item
Sort upwards
Sort downwards
 Identification |
Internal Ø min. (mm) |
External Ø min. (mm) |
Wall thickness (mm) |
Min. bending radius (mm) |
OP at 20°C (stat.) (bar) |
Weight per m (kg) |
|---|---|---|---|---|---|---|
| ASW 013 | 11,5 | 16,2 | 1,25 | 38 | 7,0 | 0,072 |
| ASW 016 | 15,5 | 20,2 | 1,25 | 42 | 5,0 | 0,180 |
| ASW 020 | 20,0 | 23,2 | 1,00 | 50 | 5,0 | 0,200 |
| ASW 025 | 22,8 | 26,0 | 1,00 | 70 | 5,0 | 0,200 |
| ASW 032 | 30,5 | 35,7 | 1,50 | 85 | 5,0 | 0,450 |
| ASW 040 | 36,5 | 42,5 | 1,50 | 100 | 5,0 | 0,660 |
| ASW 050 | 48,5 | 55,1 | 1,65 | 140 | 5,0 | 0,950 |
Ordering information
Other designs available on request
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.