Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
K-DRG MEMBRAN O SEKUNDAERENTL MANO
Pressure regulators with pressure gauge
Product image
Properties
| Input pressure |
Max. 25 bar |
| Media temperature |
max. 50 °C |
| Ambient temperature |
Max. 50 °C |
| Flow rate |
3.5 l/min |
| Sealant |
NBR |
| Spring bonnet |
POM |
| Housing |
Brass |
| Diaphragm |
NBR |
| Flow rate measurement |
At P1 = 7 bar, P2 = 5 bar (water) and pressure drop Δp ≤ 1 bar |
Description
Diaphragm pressure regulators with non-self relieving design for water, compressed air and non-aggressive gases.
Note
Further information on request
Item
Sort upwards
Sort downwards
 Identification |
Thread | Control range | A (mm) |
B | C (mm) |
D (mm) |
|---|---|---|---|---|---|---|
| K- 07 25 04 75 | G 1/4 | 0.1 - 3 bar | 40,0 | 78.0 mm | 63,0 | 15,0 |
| K- 07 25 04 76 | G 1/4 | 0.2 - 6 bar | 40,0 | 78.0 mm | 63,0 | 15,0 |
| K- 07 25 04 77 | G 1/4 | 0.5 - 10 bar | 40,0 | 78.0 mm | 63,0 | 15,0 |
Spare parts
- K-HALTERBAUSATZ
- Holder
- K-SCHALTTAFELMUTTER
- Nut
- K-VERSCHLEI-SATZ
- Set of wearing parts
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.