Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
K-DRG MEMBRAN O SEKUNDAERL MANO MS
Pressure regulators for Water with pressure gauge
Product image
Properties
| Input pressure |
Max. 40 bar |
| Temp. range |
+5 °C to +90 °C |
| Sealant |
NBR |
| Housing |
Brass |
| Handwheel |
Plastic (G 1/4, G 1/2), rotary switch (G 3/4, G 1) |
| Diaphragm |
NBR |
| Flow rate measurement |
At P1 = 7 bar, P2 = 6 bar and ∆p = 1 bar |
Description
Brass diaphragm pressure regulators with non-self-relieving design, specially for use with water. The regulator protects water installations against high system pressure, prevents pressure fluctuations and helps reduce water consumption. Undesirable flow noises are kept to a minimum.
Note
Further information on request
Item
Sort upwards
Sort downwards
 Identification |
Thread | Control range | Flow rate (L/min) |
A (mm) |
B | C (mm) |
D (mm) |
|---|---|---|---|---|---|---|---|
| K- 07 25 04 78 | G 1/4 | 0.5 - 6 bar | 3 | 45,0 | 104.0 mm | 23,0 | 81,0 |
| K- 07 25 04 79 | G 1/4 | 0.5 - 10 bar | 3 | 45,0 | 104.0 mm | 23,0 | 81,0 |
| K- 07 25 04 80 | G 1/2 | 0.5 - 6 bar | 15 | 72,0 | 153.0 mm | 30,0 | 123,0 |
| K- 07 25 04 81 | G 1/2 | 0.5 - 10 bar | 15 | 72,0 | 153.0 mm | 30,0 | 123,0 |
| K- 07 25 04 82 | G 1 | 0.5 - 6 bar | 24 | 114,0 | 216.0 mm | 41,0 | 175,0 |
| K- 07 25 04 83 | G 1 | 0.5 - 10 bar | 24 | 114,0 | 216.0 mm | 41,0 | 175,0 |
| K- 07 25 04 84 | G 1 1/2 | 0.5 - 6 bar | 56 | 114,0 | 233.0 mm | 50,0 | 183,0 |
| K- 07 25 04 85 | G 1 1/2 | 0.5 - 10 bar | 56 | 114,0 | 233.0 mm | 50,0 | 183,0 |
Spare parts
- K-HALTERBAUSATZ
- Holder
- K-MEMBRANE DICHTKEGEL
- Sealing cone, complete
- K-RD NIPPEL KURZ 1
- Reducing nipples, short type
- K-XV AGM 2
- Double nipples, parallel male thread
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.