Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
K-FI RUECKSPUELFILTER
Back-flushing filters
Product image
Properties
| Input pressure |
Max. 16 bar |
| Ambient temperature |
+5 °C to +40 °C |
| Water temp. min. |
5 °C |
| Water temp. max. |
30 °C |
| Pore size in filter element |
90 μm (first filter element), 110 μm (second filter element) |
| Housing |
Brass |
| Filter bowl |
Impact-resistant plastic |
| Flow rate |
at Δp = 0.2 bar |
| More information |
DVGW Zertifikat |
Description
For filtering drinking and domestic water in addition to well, process and cooling water for once-through cooling systems. These filters protect the water pipes and all water-carrying parts of the system on the downstream side against malfunctions and corrosion damage. The filter candle must be cleaned manually at regular intervals by back-flushing (flushing out dirt particles). Integrated back-flushing element with suction elements, back-flushing lever, wing lever for back-flushing element, hose connection for flushing water.
Note
Further information on request
Item
Sort upwards
Sort downwards
 Identification |
Thread | DN | flow kvs-value (m3/h) |
A (mm) |
B | C (mm) |
|---|---|---|---|---|---|---|
| K- 07 25 10 08 | R 3/4 | 20 | 3,0 | 80,0 | 184.0 mm | 352,5 |
| K- 07 25 10 09 | R 1 | 25 | 3,5 | 80,0 | 184.0 mm | 352,5 |
| K- 07 25 10 10 | R 1 1/4 | 32 | 4,0 | 106,4 | 228.0 mm | 352,5 |
Spare parts
- K-FILTEREINSATZ
- Filter insert
- K-KUNSTSTOFFBEHAELTER
- Plastic tank
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.