K-DRG SAXONIA M MANO
Pressure regulatorsProduct image
Properties
Input pressure |
Max. 16 bar |
Media |
Drinking water |
Operating temperature |
Max. 30 °C |
Sealant |
NBR |
Spring bonnet |
Plastic |
Housing |
Brass |
Filter bowl |
Plastic, with control dial for back pressure |
More information |
DVGW Zertifikat |
Description
Diaphragm pressure regulators with pressure-reduced single-seated valve and built-in strainer. These pressure regulators, which are independent of inlet pressure, protect domestic water installations against excessive supply pressure. They can also be used for commercial or industrial purposes providing their specification is adequate.
Note
Further information on request
Item
Sort upwards
Sort downwards
Identification | Thread | DN | Control range | flow kvs-value (m3/h) |
A (mm) |
B |
---|---|---|---|---|---|---|
K- 07 25 04 72 | R 3/4 | 20 | 1.5 - 6 bar | 3,4 | 90,0 | 158.0 mm |
K- 07 25 04 73 | R 1 | 25 | 1.5 - 6 bar | 5,3 | 100,0 | 184.0 mm |
K- 07 25 04 74 | R 1 1/4 | 32 | 1.5 - 6 bar | 8,6 | 130,0 | 228.0 mm |
Spare parts
- K-VENTILAUSTAUSCHSATZ
- Valve replacement kit
- K-ERSATZSIEBE
- Replacement strainer
- K-RMM U STAHL
- Standard pressure gauges (sheet steel housing / connection radial on bottom)
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.