FPCO
Metal hoseAdditional documents
Product image
Properties
Application |
The close curl suitable for small bending radii |
Design |
parallel corrugation single wall narrow corrugation |
Hose material |
Stainless steel 1.4541 |
Braiding |
without braiding |
Standard |
DIN EN ISO 10380 |
Temp. min. |
-200 °C |
Temp. max. |
550 °C |
Temp. |
applies for the hose only |
Note
Please take into account the dynamic and thermal reduction factors with respect to the pressure values.
The pressure values listed apply to hoses only.
Item
Sort upwards
Sort downwards
Identification | Ø ID (mm) |
Ø AD (mm) |
Tolerances of ID/ED (mm) |
bend radius stat. (mm) |
OP at 20°C (stat.) (bar) |
---|---|---|---|---|---|
FPCO 013 | 12,00 | 18,60 | 0,40 | 21 | 6,0 |
FPCO 016 | 15,00 | 22,50 | 0,40 | 26 | 3,0 |
FPCO 020 | 19,90 | 28,30 | 0,40 | 32 | 2,2 |
FPCO 025 | 24,90 | 34,80 | 0,40 | 37 | 1,8 |
FPCO 032 | 31,80 | 43,40 | 0,50 | 46 | 1,6 |
FPCO 040 | 39,60 | 52,40 | 0,50 | 55 | 1,2 |
FPCO 050 | 49,40 | 64,80 | 0,60 | 65 | 1,0 |
FPCO 065 | 64,00 | 80,90 | 0,70 | 80 | 0,5 |
FPCO 080 | 78,70 | 99,60 | 0,80 | 97 | 0,7 |
FPCO 100 | 101,00 | 126,50 | 0,80 | 113 | 0,4 |
FPCO 150 | 148,20 | 174,00 | 1,00 | 152 | 0,2 |
Ordering information
Other designs available on request
Product versions
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.