HD 800
HD hoseProduct image
Properties
Application |
Mineral oil-based high pressure hydraulic systems hydrostatic drives Construction industry Agricultural technology |
Special features |
narrow bending radius |
Standard |
DN16 exceeds EN 856 4SP DN 19 - DN 31 exceeds SAE 100 R15 |
Inner layer |
oil resistant synthetic rubber |
Insert |
NW 16-25 four from NW 32 six high-tensile steel wire spiral inserts |
Outer layer |
synthetic rubber with high abrasion resistance |
Colour |
black |
Temp. min. |
-40 °C |
Temp. max. |
100 °C |
Media |
Hydraulic oils (mineral oil base) |
impulse test |
DN16, DN19 Qualified under laboratory conditions with 3 million bending cycles |
Approval |
MSHA IC-84/19, DIN5510 |
Item
Sort upwards
Sort downwards
Identification | DN* | Size | Inches | Internal Ø (mm) |
External Ø (mm) |
Operating pressure (bar) |
Test pressure (bar) |
Burst pressure (bar) |
Min. bending radius (mm) |
Weight / meter (kg) |
---|---|---|---|---|---|---|---|---|---|---|
HD 816 | 16 | 10 | 5/8" | 15,9 | 29,0 | 500,0 | 1000 | 2000 | 200 | 1,20 |
HD 820 | 19 | 12 | 3/4" | 19,1 | 33,3 | 500,0 | 1000 | 2000 | 215 | 1,53 |
HD 825 | 25 | 16 | 1" | 25,4 | 40,4 | 500,0 | 1000 | 2000 | 270 | 2,07 |
HD 832 | 31 | 20 | 1.1/4" | 31,8 | 50,9 | 500,0 | 1000 | 2000 | 380 | 3,60 |
DN = Nominal diameter, nominal width
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.