HK DTDA
2/2-way solenoid-operated directional control valve DTDAProduct image
Properties
Design |
direct-controlled with manual emergency operation |
Scope of supply |
without coil or plug |
Operating pressure |
max. 350 bar |
Description
Max. leakage 0.7cm3/min at 250 bar and 32cSt
Item
Sort upwards
Sort downwards
Identification | Circuit diagram | Volumetric flow min. (L/min) |
A (mm) |
B (mm) |
C (mm) |
Screw-in housing | Screw-in thread | AF (mm) |
Tightening torque (N-m) |
Design | Weight (kg) |
---|---|---|---|---|---|---|---|---|---|---|---|
HK DTDA MCN | 40,0 | 89,0 | 35,0 | 37,0 | HK GAU / HK GAUS / HK GAV | T-13A | 22 | 48,0 | power-off closed, double locking | 0,5 | |
HK DTDA MHN | 40,0 | 89,0 | 35,0 | 37,0 | HK GAU / HK GAUS / HK GAV | T-13A | 22 | 48,0 | power-off open, double locking | 0,5 |
Ordering information
Please order solenoid coil separately (see accessories)
Accessories
- HK SP 770
- Coil for cartridge valve SUN
- HK GEH GA
- Valve housing for cartridge valve T-13A
- HK GEH GBA
- Housing sandwich plate with measurement connctn. for cart. valve T-13A
- HK GEH GBY
- Housing sandwich plate with measurement connctn. for cart. valve T-13A
- HK GEH MBJ
- Housing sandwich plate for cartridge valve T-31A
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.