HK NTM XP
Level/temperature switch with LED display HK NTMXPProduct image
Properties
Operating pressure |
max. 1 bar |
Operating temperature max. |
70 °C |
Connection |
G 3/4" male |
Operating voltage |
24 V DC |
Electrical connection |
M12x1, 4-polig |
Protection IP |
IP 65 |
Material |
Float SK 601 - hard PU Switching tube - brass Gasket: NBR |
Scope of supply |
without plug |
Description
Housing can be rotated to 270°
Output: 2x PNP (freely programmable, NC/NO, window/hysteresis)
Min./max. value memory
Level measurement: Sensor length 45 mm, display resolution 10 mm
Temperature measurement: -20 °C to +120 °C (PT100)
Accuracy ±1 % of range limit value
Item
Sort upwards
Sort downwards
Identification | L (mm) |
Weight (kg) |
---|---|---|
HK NTM XP MS 2S 280 | 280 | 0,39 |
HK NTM XP MS 2S 370 | 370 | 0,41 |
HK NTM XP MS 2S 500 | 500 | 0,43 |
Ordering information
Order M12 plug with cable separately
Accessories
- HK DSR 4POL
- M12 4-pin angle plug with cable
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.