Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
K-3 BKR STELLANTR D L MS
Brass ball valves, 3-way, with double-acting actuator, L-bore
Product image
Properties
| Design |
Pneumatic actuators, in double- or single acting version, with integrated end-position feedback |
| Bore |
L shaped |
| Operating temperature |
-20 °C to +70 °C |
| Angle of rotation |
90 ° |
| Pilot pressure |
5.5 bar |
| Valve adapter |
Supplied as standard |
| Drive |
aluminium eloxed |
| Drive seal |
NBR |
| Ball valve |
Chrome-plated brass, with ISO-flange plate |
| Ball valve seal |
PTFE/FKM |
Description
3-way cock, L-bore, full bore
Note
G thread acc. to DIN EN ISO 228-1, with ISO flange plate (acc. to ISO 5211)
Further information on request
Item
Sort upwards
Sort downwards
 Identification |
DN | Thread | Position | PN (bar) | A (mm) |
B (mm) |
D (mm) |
L (mm) |
AF (mm) |
|---|---|---|---|---|---|---|---|---|---|
| K- 07 30 02 84 | 15 | Rp 1/2 | L | 40 | 116,0 | 133,0 | 20,0 | 64,5 | 25 |
| K- 07 30 02 85 | 20 | Rp 3/4 | L | 40 | 116,0 | 137,0 | 24,0 | 76,0 | 31 |
| K- 07 30 02 86 | 25 | Rp 1 | L | 40 | 116,0 | 141,5 | 30,0 | 97,0 | 41 |
| K- 07 30 02 87 | 32 | Rp 1 1/4 | L | 40 | 133,0 | 165,5 | 37,0 | 118,0 | 55 |
| K- 07 30 02 88 | 40 | Rp 1 1/2 | L | 25 | 137,0 | 181,5 | 43,0 | 135,0 | 55 |
| K- 07 30 02 89 | 50 | Rp 2 | L | 25 | 161,0 | 204,0 | 56,0 | 157,0 | 67 |
Additional information
Other T-positions on request
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.