K-DRG PNEU FERNGESTEUERT
Pressure regulators pneumatic remote control
Product image
![K-DRG PNEU FERNGESTEUERT K-DRG PNEU FERNGESTEUERT](/data/img/product/00019048_0.jpg)
![K-DRG PNEU FERNGESTEUERT - data/img/product/00042541_0.jpg data/img/product/00042541_0.jpg - K-DRG PNEU FERNGESTEUERT](/data/img/product/00042541_0.jpg)
Properties
Input pressure |
Max. 25 bar |
Output pressure |
Acc. to pilot regulator |
Media temperature |
max. 80 °C |
connection for pneumatic remote control |
G 1/4 |
Operating temperature |
Max. 80 °C |
Sealant |
NBR |
Housing |
Die-cast zinc (G1/2). Aluminium (G3/4 to G2) |
Flow rate measurement |
At P1 = 8 bar, P2 = 6 bar and pressure drop ∆p = 1 bar |
Description
Diaphragm pressure regulators, self-relieving, with pneumatic remote control. The full functionality is assured in combination with a pilot regulator. We recommend using one of our precision or standard pressure regulators with a G 1/4 port as the pilot regulator. To design a closed control loop similar to the sketch below (K-07250511), please use our precision pilot regulator (feedback).
Note
Further information on request
Item
![](/images/up.gif)
Sort upwards
Sort downwards
![]() |
Circuit diagram | Thread | Flow rate (L/min) |
A (mm) |
B |
---|---|---|---|---|---|
K- 07 25 05 05 | ![]() ![]() |
G 1/2 | 5200 | 82,0 | 68.0 mm |
K- 07 25 05 06 | ![]() ![]() |
G 3/4 | 14000 | 117,0 | 108.0 mm |
K- 07 25 05 07 | ![]() ![]() |
G 1 | 14000 | 117,0 | 108.0 mm |
K- 07 25 05 08 | ![]() ![]() |
G 1 1/4 | 35000 | 125,0 | 122.0 mm |
K- 07 25 05 09 | ![]() ![]() |
G 1 1/2 | 35000 | 125,0 | 122.0 mm |
K- 07 25 05 10 | ![]() ![]() |
G 2 | 50000 | 160,0 | 197.0 mm |
Accessories
![](/images/up.gif)
- K-HALTERBAUSATZ STANDARD
- Holder
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.