Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
K-DRV ABLD GEW C SCHLITZ
Unidirectional flow control valves, outgoing air restriction (»C«), screw connection
Product image
Properties
| Operating pressure |
Max. 10 bar |
| Temp. range |
0 °C to +70 °C |
| Hollow screw, pivot arm, regulating screw |
Nickel-plated brass |
| Internal parts |
Brass with a bare metal surface |
| lip seal O-ring |
NBR |
| Seals (non-detachable) |
Polyamide (glass fibre-reinforced) |
Description
For fine regulation of a cylinder piston speed and precise control of flow rates. Designed as a banjo-type valve with a hollow bolt and ring piece. Can be screwed directly onto the valve or cylinder. Compact type of construction, also ideal where space is restricted.
Note
Further information on request
Item
Sort upwards
Sort downwards
 Identification |
Connection | C (mm) |
Thread | AF | B (mm) |
|---|---|---|---|---|---|
| K- 07 15 05 40 | M 5 female thread | 11,5 | M 5 | 8 mm | 24,5 |
| K- 07 15 05 45 | G 1/8 female thread | 16,0 | G 1/8 | 14 mm | 32,0 |
| K- 07 15 05 41 | G 1/4 female thread | 22,0 | G 1/4 | 17 mm | 40,0 |
| K- 07 15 25 24 | G 3/8 female thread | 26,0 | G 3/8 | 20 mm | 50,0 |
| K- 07 15 25 23 | G 1/2 female thread | 32,0 | G 1/2 | 26 mm | 61,0 |
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.