Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
K-GRUNDEJEKTION SBP
Basic ejectors
Product image
Properties
| Properties |
Vacuum generator without control valves or system monitoring functions, with a high maximum vacuum value (85%) No moving parts, which means no wear and no maintenance Maximum suction capacity with minimum compressed air consumption Minimum size, low weight For decentralised vacuum generation in highly dynamic processes |
| Application |
For universal use in lightweight gripper systems to handle air-tight workpieces as well as for automatic separation systems, e.g. in the plastics, electronics and packaging industries. Also ideal for the construction of ejector blocks for decentralised control of suction pads. |
| Housing |
Plastic (impact-resistant) |
| Connection |
Push-in coupling |
| Operating pressure |
4.5 bar |
| degree of evacuation |
85 % |
| Silencer |
Plastic |
Description
Purely pneumatic vacuum ejector that operates on the Venturi principle. Compressed air enters the ejector at A and flows through the nozzle B. This results in a vacuum immediately behind the nozzle outlet, and air is drawn in through the vacuum inlet D. This air and the driving air leave the ejector via the silencer C.
Note
Further information on request
Item
Sort upwards
Sort downwards
 Identification |
Nozzlesize | Pneumatic connection | Vacuum inlet | air consumption suction (L/min) |
max. suction capacity (L/min) |
Dimension |
|---|---|---|---|---|---|---|
| K- 07 45 01 13 | 0,5 | 4 mm | 4 mm | 14,0 | 8,0 | 71mm x 10mm x 28mm |
| K- 07 45 01 14 | 0,7 | 4 mm | 4 mm | 22,0 | 16,0 | 71mm x 10mm x 28mm |
| K- 07 45 01 15 | 1,0 | 6 mm | 8 mm | 48,0 | 37,7 | 97mm x 15mm x 40mm |
| K- 07 45 01 16 | 1,5 | 6 mm | 8 mm | 105,0 | 71,0 | 97mm x 15mm x 40mm |
| K- 07 45 01 17 | 2,0 | 8 mm | 10 mm | 197,0 | 127,0 | 168mm x 20mm x 46mm |
| K- 07 45 01 18 | 2,5 | 8 mm | 10 mm | 311,0 | 215,0 | 168mm x 20mm x 46mm |
Accessories
- K-GRUNDPLATTEN 1
- Base plate
- K-ERSATZSCHALLDAEMPFER 3
- Replacement silencers
- K-ERSATZSCHALLDAEMPFER 1
- Replacement silencers
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.