Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
K-LEITUNGSDRUCKREGLER 200 BAR
Inline pressure regulators up to 200 bar
Product image
Properties
| Operating pressure |
max. 200 bar |
| Operating temperature |
-10 °C to +90 °C |
| Adjustment |
Knob (50 bar), Rotary switch (100 and 150 bar) |
| Sealant |
NBR |
| Material |
Brass |
Description
Inline pressure regulator input pressure, suitable for compressed air, nitrogen and other neutral, compressed gases.
Note
Further information on request
Item
Sort upwards
Sort downwards
 Identification |
Thread | Control range | Flow rate (L/min) |
A (mm) |
B | C (mm) |
D (mm) |
E (mm) |
|---|---|---|---|---|---|---|---|---|
| K- 07 25 08 27 | G 1/4 female | 1 - 50 bar | 2500 | 162,0 | 188.5 mm | 100,0 | 76,0 | 50,0 |
| K- 07 25 08 28 | G 1/4 female | 1 - 100 bar | 2700 | 162,0 | 213.5 mm | 125,0 | 76,0 | 130,0 |
| K- 07 25 08 29 | G 1/4 female | 1 - 150 bar | 2900 | 162,0 | 213.5 mm | 125,0 | 76,0 | 130,0 |
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.