Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
K-PRAEZI DRUCKREGL PNEU FERN
Precision pressure regulators
Product image
Properties
| Input pressure |
Max. 16 bar |
| Media temperature |
max. 60 °C |
| Ambient temperature |
Max. 60 °C |
| Media |
Micro-filtered, unoiled compressed air (0.01 μm) |
| Port for pressure gauge |
G 1/4 |
| Flow rate |
3000 l/min |
| Vent port |
G 3/8 (for mounting a silencer) |
| Pilot pressure |
Max. 10 bar |
| Control air port |
G 1/8 |
| Sealant |
NBR |
| Housing |
Die-cast zinc, painted black |
| Internal air consumption |
6 l/min at Pin = 16 bar |
Description
With high flow rate and large secondary relief port. Pneumatically controlled diaphragm pressure regulators with large secondary relief portfor applications requiring an extremely accurate working pressure, especially at high flow rates. We recommend our »multifix« series of pilot controllers.
Note
Attention! A set of wearing parts cannot be supplied! These pressure regulators may only opened in the factory! The given flow rates are based on the following parameters: 3000 l/min: P1: 5 bar, P2: 3 bar, Δp ≤ 0,1 bar.
Further information on request
Item
Sort upwards
Sort downwards
 Identification |
Thread | Control range | A (mm) |
B | C (mm) |
D (mm) |
|---|---|---|---|---|---|---|
| K- 07 25 09 35 | G 1/2 | 0.05 - 7 bar (max. 10 bar) | 82,0 | 108.0 mm | 64,5 | 43,5 |
Additional information
1500 l/min: P1: 10 bar, P2: 7 bar, Δp ≤ 0.1 bar.
Spare parts
- K-HALTERBAUSATZ STANDARD
- Holder
- K-KM MS
- Hexagonal lock nuts, brass
- K-SCHALLDAEPFER VYON
- Vyon silencers
- K-FILTERELEMENT
- Filter element
- K-XV AGM 2
- Double nipples, parallel male thread
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.