Select language
Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
K-VORFIL PC-BEHLTER SCHUTZK HANSA
Pre-filters
Product image
Properties
| Input pressure |
1.5 - 16 bar |
| Temp. range |
-10 °C to +50 °C |
| Media |
Compressed air |
| Filter rating |
0,30 μm |
| Connection thread |
Material: Die-cast zinc |
| Container |
Polycarbonate (with bayonet lock) |
| Filter element |
Impregnated paper |
| Housing |
Material: Grivory® (PA 66) |
| Protective cage |
Polyamide |
| Flow rate measurement |
At P2 = 6 bar, pressure drop Δp = 0.5 bar |
Description
Pre-filters in modern design for compliance with strict compressed air purity requirements. Pre-filters are used to separate solid impurities up to 0.3 μm from compressed air and gases.
Note
Further information on request
Item
Sort upwards
Sort downwards
 Identification |
Thread | Flow rate (L/min) |
A (mm) |
B | C (mm) |
condensate outlet |
|---|---|---|---|---|---|---|
| K- 07 25 10 25 | G 1/4 | 500 | 52,0 | 169.5 mm | 39,5 | Semi |
| K- 07 25 10 26 | G 3/8 | 500 | 52,0 | 169.5 mm | 39,5 | Semi |
| K- 07 25 10 27 | G 3/8 | 750 | 63,0 | 195.0 mm | 47,8 | Semi |
| K- 07 25 10 28 | G 1/2 | 750 | 63,0 | 195.0 mm | 47,8 | Semi |
| K- 07 25 10 15 | G 3/4 | 2000 | 85,0 | 255.0 mm | 63,0 | Semi |
| K- 07 25 10 16 | G 1 | 2000 | 85,0 | 255.0 mm | 63,0 | Semi |
| K- 07 25 10 29 | G 1/4 | 500 | 52,0 | 186.5 mm | 39,5 | Auto |
| K- 07 25 10 30 | G 3/8 | 500 | 52,0 | 186.5 mm | 39,5 | Auto |
| K- 07 25 10 31 | G 3/8 | 750 | 63,0 | 210.5 mm | 47,8 | Auto |
| K- 07 25 10 32 | G 1/2 | 750 | 63,0 | 210.5 mm | 47,8 | Auto |
| K- 07 25 10 17 | G 3/4 | 2000 | 85,0 | 269.0 mm | 63,0 | Auto |
| K- 07 25 10 18 | G 1 | 2000 | 85,0 | 269.0 mm | 63,0 | Auto |
Spare parts
- K-HALTERBAUSATZ HANSA
- Holder HANSA
- K-ERSATZBEHAELTER HANSA POLY
- Spare tank HANSA polycarbonat
- K-DIFFERENZDRUCKANZEI MONO
- Differential pressure and differential pressure gauge
- K-DIFFERENZDRUCKMANOMETER
- Differential pressure gauge
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.