Bulgarian (Български)
Chinese (汉语)
Croatian (Hrvatski)
Czech (Čeština)
Dutch (Nederlands)
Estonian (Eesti)
French (Français)
German (Deutsch)
Hungarian (Magyar)
Italian (Italiano)
Latvian (Latviešu)
Lithuanian (Lietuvių k.)
Polish (Polski)
Portuguese (Português)
Romanian (Română)
Russian (Русский)
Serbian (Српска)
Slovakian (Slovenčina)
Slovenian (Slovenščina)
Spanish (Español)
Turkish (Türkçe)
NI AG
Coolant hose
Item
Create PDF 
Additional documents
HF-Fragebogen zur Auswahl von Metall-Schlauchleitungen_DE.pdf
HF-Questionnaire Choice of Metal Hose Lines_EN.pdf
HF-Technische_Informationen_Metallschläuche_DE.pdf
HF-Technical_Information_Metal_Hoses_EN.pdf
Product image
Properties
| Application |
Coolant and lubricant lines for metal chipping processes. |
| Design |
Steel support helix with PVC inner hose Inlet side: Screw-in pin Outlet side: Steel discharge nozzle Surface nickel-plated |
| Properties |
Completely tight can be bent into almost any position by hand tough resistant to oils, greases etc. |
Item
Sort upwards
Sort downwards
 Identification |
G1 | ID (mm) |
S1 (mm) |
Nominal length (+/-5 mm) |
|---|---|---|---|---|
| NIAG 1/8-200 | R 1/8" | 8,0 | 15,0 | 200 |
| NIAG 1/8-250 | R 1/8" | 8,0 | 15,0 | 250 |
| NIAG 1/8-320 | R 1/8" | 8,0 | 15,0 | 320 |
| NIAG 1/8-400 | R 1/8" | 8,0 | 15,0 | 400 |
| NIAG 1/8-500 | R 1/8" | 8,0 | 15,0 | 500 |
| NIAG 1/8-630 | R 1/8" | 8,0 | 15,0 | 630 |
| NIAG 1/8-800 | R 1/8" | 8,0 | 15,0 | 800 |
| NIAG 1/4-200 | R 1/4" | 10,0 | 19,0 | 200 |
| NIAG 1/4-250 | R 1/4" | 10,0 | 19,0 | 250 |
| NIAG 1/4-320 | R 1/4" | 10,0 | 19,0 | 320 |
| NIAG 1/4-400 | R 1/4" | 10,0 | 19,0 | 400 |
| NIAG 1/4-500 | R 1/4" | 10,0 | 19,0 | 500 |
| NIAG 1/4-630 | R 1/4" | 10,0 | 19,0 | 630 |
| NIAG 1/4-800 | R 1/4" | 10,0 | 19,0 | 800 |
| NIAG 3/8-250 | R 3/8" | 10,0 | 24,0 | 250 |
| NIAG 3/8-300 | R 3/8" | 10,0 | 24,0 | 300 |
| NIAG 3/8-320 | R 3/8" | 10,0 | 24,0 | 320 |
| NIAG 3/8-400 | R 3/8" | 10,0 | 24,0 | 400 |
| NIAG 3/8-500 | R 3/8" | 10,0 | 24,0 | 500 |
| NIAG 3/8-630 | R 3/8" | 10,0 | 24,0 | 630 |
| NIAG 3/8-800 | R 3/8" | 10,0 | 24,0 | 800 |
| NIAG 1/2-250 | R 1/2" | 12,0 | 27,0 | 250 |
| NIAG 1/2-320 | R 1/2" | 12,0 | 27,0 | 320 |
| NIAG 1/2-400 | R 1/2" | 12,0 | 27,0 | 400 |
| NIAG 1/2-500 | R 1/2" | 12,0 | 27,0 | 500 |
| NIAG 1/2-630 | R 1/2" | 12,0 | 27,0 | 630 |
| NIAG 1/2-800 | R 1/2" | 12,0 | 27,0 | 800 |
Ordering information
Other sizes on request
Disclaimer
Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.